Search results

  1. C

    thinking about spraying a 75 shot can i keep the 93 tune in my car?

    What systems are you going to run? A wet or dry?
  2. C

    Granatelli Stroker Motor

    I agree, and I think that setup would make great power and be more efficient. It would be intresting to see what the gains are just from that combo. I smell new project.:nice:
  3. C

    Granatelli Stroker Motor

    The hand painting was done by the customer in Texas, as for the intake and throttle body i would agree, as for the Tune i think the tune is spot on, i have built 6 different mustangs for my personal car's and the tuner here by far does the best job. in my own opinion.:nice:
  4. C

    Granatelli Stroker Motor

    Well the customer drove it from here to vegas and back, and then to texas, so i would say it is running fine. did your brother get the K member directly from GMS, and did he try and exchange it when it didnt fit? please let me know i would like the feed back. thanks.
  5. C

    Granatelli Stroker Motor

    I am sure that was before i got here and before we were under new managment, so why dont we keep the bashing to a minimum and can you PM me you bad experience so we can discuss it further. thanks
  6. C

    GRANATELLI MAF SALE

    Granatelli Motor Sports is currently offering a sale on ALL 1996-2004 Mass Air Meters for 2v, 3v and 4v applications. Price - $125.00 each The parts are brand new sold as is, with the traditional large (tall) 3 pin filters made famous by Bob Atwood from the original Pro-M days...
  7. C

    Granatelli Stroker Motor

    Pictured here is one of our most recent project cars we developed for a war hero that lives in Texas: 2006 Mustang GT that we finished and dyno'd before SEMA. The car has a Granatelli Motor sports Aluminum 5.0 Stroker engine with Granatelli stage 3 heads. At 11lbs of boost and California 91...
  8. C

    4V billet Valve covers

    Check out these 4V billet valve covers, they start out from a 107lb block of billet and are widdled down to 6lbs which is 3lbs lighter than the factory valve covers. they fit the 1999-2001 and 2003-2004 cobra, and any other 4V head for that matter. What does everyone think?
  9. C

    Twin Turbo Stroker Motor

    this motor is still available and would make for a great winter project.:nice:
  10. C

    2005-2010 Mustang Billet Swaybar bushing

    2005-2010 Granatelli Motor Sports Mustang Billet Front Sway Bar Mount Fits 2005-2010 Mustang GT and V-6 Direct OEM replacement Eliminate flex from sway bar and improves handling Billet 6061-T6 aluminum construction Re-uses factory hardware (bushings are included) Installs...
  11. C

    3V billet oil Pump Gears

    Hey everyone i have not seen them yet, but who whould be instrested in them if they were available?
  12. C

    Twin Turbo Stroker Motor

    This Motor is still available
  13. C

    99-04 Cobra COP Covers

    We have set that is polished and a set as shown above. the price is 199.99 plus shipping.
  14. C

    GMS 2005-2009 V6 Coil Pack

    For the month of september or while supplies last the new cost is 169.99 + shipping, limited supply.
  15. C

    GMS Summer Blow Out for 2005-2009 guys

    Only three days left for these rock bottom prices.
  16. C

    03-04 cobra Borla exhaust

    sold
  17. C

    03-04 cobra Borla exhaust

    This kit will also work with a 99-01 cobra
  18. C

    03-04 cobra Borla exhaust

    Part Number 140052 brand new in the box. i only have one. it was never used on a project we had at the facility. 500.00 plus shipping please contact us for details. Under Pressure... Millions of exhaust sytems are replaced every year due to corrosion and poor performance. Automotive...
  19. C

    GMS Summer Blow Out for 2005-2009 guys

    Granatelli Motors is having a spring sale on certain 2005-2009 parts. Here is the list of Parts and part numbers. GM-ES0530 3 Inch Exhaust with X pipe Off road use only 360.00+shipping GM-ES0525 2.5inch Exhaust Cat Back System 199.99 +shipping GM-SHK0507 Shocks 2005-2009...
  20. C

    Sale:GMS Sway Bar elminator 2005-2009

    Fits 2005-09 Mustang GT Replaces front sway bar Lightens front end Improves weight transfer & traction Dramatically improves 60 ft. times Recommended for racing only HD tubular steel w/precision welds Durable Blue powder coated finish Includes all necessary hardware Installs in...
Top Bottom
Back
Forums
Menu