Search results

  1. C

    Power Steering Rack Return Port Threads

    I either forgot to remove fitting or lost it does anyone know what size the threads are/what size Fitting needs to be used here? I have a reman quick ratio rack I contacted te the rebuider but they were no help.
  2. C

    Engine doesnt turn off

    Im sorry jrichker I did'nt answer your question I replaced the actual electrical switch not the key switch. Now after finding out the actual location not the assumed (i know i know) location for the EEC relay and studying the excellent diagram by tmoss I see that I have some melted wires and...
  3. C

    Engine doesnt turn off

    No the radio and fan and stuff all turn off with the key switch I am confused.
  4. C

    Engine doesnt turn off

    Should that be energized only at WOT because that and the EEC relay are staying energized until I remove the ground at the battery.
  5. C

    Engine doesnt turn off

    I thought that relay was on the pass. side fender??
  6. C

    Engine doesnt turn off

    I have an 88 GT and the other day I parked the car turned off the key switch radio and other accessories turned off but not the engine had to pull the fuel pump relay to get it to shut off. The ECM also stays powered up also till you remove the ground So I figured key switch good ignition...
  7. C

    Help? installing Cobra ECM on 88 SD car

    What about a hessitation what does it do? Are you saying this may not of been such a good idea I had read on here that a cobra ecm was the thing to have???
  8. C

    Help? installing Cobra ECM on 88 SD car

    Thanks guys and yes I do have the 76mm mass air housing and 24# injectors
  9. C

    Help? installing Cobra ECM on 88 SD car

    Would installing a cobra ECM be just the same as doing any other mass air conversion or are there other pin outs or other things:shrug: that would need to be done?
  10. C

    ECM question

    Thanks thats pretty much what i though
  11. C

    ECM question

    I purchased a new used ECM to do a mass air upgrade but I would like to try to start my new motor and I think my old ECM is no good it was a speed density ECM can I just plug in the new one without changing the wiring harness or will that damage the ECM?
  12. C

    Little help cant keep new engine running

    Thanks for your help :nice:
  13. C

    Little help cant keep new engine running

    I basically understood the problem with speed density but I thought that having a custom made chip i would be ok. Should i just junk the chip and do a MAF conversion? I was intimidated because of the pin change outs and I am color blind and my electrical skills are only so so as it is and didnt...
  14. C

    Little help cant keep new engine running

    Ok so I put a 306 short block in my 88 GT with the following mods an E303 cam, and FMS hydraulic roller lifters, explorer intake, 24 lbs injectors, new heads 1.94 intake 1.60 exhaust, stud mounted 1.6 roller rockers i set the valves on the base circle of the cam obviously i have yet to adjust...
  15. C

    Starts hard hard and wont stay runing

    Ok so I have a new 306 short block with an Explorer intake, an E303 cam, 24 lbs injectors, I have removed the smog pump, added an EGR eliminator and block off plate, the car is till stock speed density. It will only stay runinng if I keep my foot on the gas lightly let go and it dies instantly I...
  16. C

    Help Skipping Problem

    Have you replaced your O2 sensors lately and also it seems to be preffered to also post what year car you have as well any mods you may have but I would start with your O2 sensors if they are old
  17. C

    Need help with which water pump bolts go where

    Hey your pics didnt come through when you click on the link nothing happens
  18. C

    Oil pump pressure problem

    I am thinking that my oil pump in my new engine is not making any pressure about how long should I have to run the pump via the drill priming rod? I am not getting anything comeing out of the heads and nothing in the oil filter either I ran it for a few minutes and no oil anywhere other than in...
  19. C

    Phenolic fitment??

    What is the thickest phenolic you can use with a stock hood?
  20. C

    stud mount rocker help?

    I went through and set one bank and then the other bank making sure that I was on the base circle and allowing each lifter to bleed down first but I did not set them in the actual firing order is this an ok way to do that?
Top Bottom
Back
Forums
Menu