Search results

  1. 5

    Expired 88 Notchback

    Was the car in a accident? Does it run and drive enough to get on a trailer? Can you take more pics and send to my email please. [email protected] Do you have all the parts to complete the body? How is the interior? How solid is it floors, lower shock towers, torque boxes? Very interested.
  2. 5

    turbine wheels and tires

    Rims are gone. Just have the 1" bolt on spacers 100 for the set plus shipping.
  3. 5

    turbine wheels and tires

    Tires are gone. Just rims and 1" spacers 200 for the set plus shipping.
  4. 5

    4 wheel 5 lug swap

    8.8 out of a foxbody works fine its alittle longer but it works great with wider tires. I used a old article I found on the web to help. I think it was called shoe in surprise, 8.8 install in a mII. I think it was from 1989. Hope this helps.
  5. 5

    RAG JOINT

    I want to say dorman or help makes a kit you can buy at autozone or pepboys. It is about 20 bucks thats what I used on my car.
  6. 5

    Mustang II front valance

    I always had good luck with the Mustang II specialty shop. He dont have a website. This is his number 334-298-3038. I bought alot of stuff over the years from him his name is Phil nice to deal with. Hope this helps.
  7. 5

    Meet Nightmare

    In my opinion the rims you have on the car look better then 4 lug 13" cragars and I hate the rims you have on there now. Price to high I dont think so I did say obo. For your info I seen a set not that nice for 150 plus shipping no tires or caps. You seeing them in your area for a 100 nice with...
  8. 5

    Cobra 11 headers with 5 speed installed

    I live in Oak Lawn IL. I would say between the two you can make a nice set for your car. I can look too see if I have that clutch fork laying around also, its hack but it worked for 8 years.
  9. 5

    Automatic to T-5 ?

    Clutch pedals are different between power and manual brakes on a II keep that in mind when you are buying them. If you had a aod your car the drive shaft should be good I would think. I used a stock II clutch cable. The hard part is the firewall bracket or sleeve for the clutch cable to go...
  10. 5

    Meet Nightmare

    Like I posted earlier I had them on my II with spacers and those will go with. You just bolt them on and go. I even have the inside covers to keep the brake dust off the rims.
  11. 5

    Cobra 11 headers with 5 speed installed

    I had the same trouble on mine fox bell housing and trans. I used hedman headers and I had to shorten the clutch fork. It did work but the clutch cable did end up resting on one of the header tubes I had to wrap both with heat wrap never did have trouble with it. I do have two pair of hedmans if...
  12. 5

    Meet Nightmare

    Got a nice set of turbines with BFG tires with center caps and 1 inch bolt on spacers to fit the II. I used them on my car for a few years The tires dont even have 1000 miles on them. 225 60 15 front 235 60 15 rear. 500 obo I live in chicagoland il.
  13. 5

    Fiberglass doors

    Has anyone put these on there car? Whats the best ones to get? Looking to get some more weight out of the car. Plus mine are rusted. The car is 2700 now.
  14. 5

    4 lug swap

    You are posting in parts wanted and for sale. You can check speedway motors I think they have 5 lug front rotors for street rods. The axles you may have to order new with 5 lug configuration, before you spend the money on the 8 inch look into the 8.8 out of a foxbody. 8inch rear is not that...
  15. 5

    headers for a mustang ll with a 351w

    The pinto swap 351 and they did have them in 302 headers were hooker. The 8 primary tubes under the crossmember are the hedmans. I am pretty sure you can get all of these from summit the only thing is the hookers for the pinto they need a certain amount before they produce a batch. I was...
  16. 5

    Electric fuel pump mounting location

    It depends on your exhaust and fuel tank. When I had the stock tank I mounted my pump were the rear muffler would go. The car had headers and little glasspacks so the exhaust never made it back so there was plenty of room next to the tank. Now I have a cell that is mounted in the spare tire...
  17. 5

    headers for a mustang ll with a 351w

    I think hedman makes the hustler for the 351w. The only thing is I think they need a engine plate no motor mounts I could be wrong. The only other thing would be custom.