Search results

I have a 2001 Mustang Bullitt with right under 100k miles and I am trying to figure out if the engine is seized up. My husband thought it was the starter so we changed it, but still the same issue. When you turn the key, the motor turns for a second or two then the whole engine jumps like it...

We have an 03 Sonic Blue Cobra with lots of mods and 10k miles. We have had it a few years now and recently it started doing something crazy. It will run fine for about 23 minutes or so then just shutdown even if you are driving down the road. Doesn't matter if you run it hard or not will run...

I am looking to change the interior color of a 06 mustang. I need to know if the piece under the passenger airbag and on top glove box can be swapped out without pulling the dash?

I am pretty sure I have narrowed down to the pump being the issue. Anyone have suggestions for a replacement. Should I replace the whole assembly or just the pump? Also what brand would you recommend?

I posted a while back about having an issue with the PATS system. I have fixed that problem. Next code was a fuel rail pressure sensor. I have changed that as the car still won't start. It will turn over, but the fuel pump is not kicking on. Is there a way to trace if this is a computer...

Anyone know the where abouts of 97-121? It is a 97 Deep Violet Saleen with manual transmission.

We have a 06 Mustang GT show car. It was giving a code B2103 which is PATS transceiver. We changed it this morning. Car is giving no codes now, but still won't start. It turns over and wants to fire. It did fire for a few seconds then killed again. Could this be bad fuel or some sensor even...

I am trying to figure out what is wrong with the lights for the gauge on my 67 coupe. It is not that long I have had the car, but at night nothing inside the car comes on. The little green light for lights work and blinkers lights on dash work. The lights on the car, both front and back work...

I have a 67 coupe and the emergency brake handle is froze in the outer postion. It was like this when I got it. Any suggestions on how to free it up? I have tried sparying it with lub and hitting it with a hammer and it will not budge. Any ideas would be helpful. Thanks.

I have an 01 Bullitt and my fuel pump is no longer kicking on. I have checked the cut off switch and fuse under the hood, both appear to be fine. Is the fuel pump relay the same as the cut off switch? Is there anything else I should check before I change the fuel pump? Thanks.

Can someone enlighten me on how to remove the rear driver's side 1/4 window? I have a couple of parts cars with a good window just not sure how to get it out of the car. Thanks.

I have a 67 mustang that runs and drives, but the brakes do need some work. It has a 289 with 3 speed trans. It has new carb., front brake shoes, started, alternator, and some other things. Now the things it needs is a new gas tank and lines, some minor body work, and a battery. It is currently...

I have a 95 GT and my orifice tube is leaking so I am just going to change the whole line. I was wondering if anyone bought the Factory Air Hose Advance Auto Parts: Hose by Factory Air - Part 56562 from Advance Auto Parts and if it was a direct replacement? This one contains both discharge and...

I have a 66 Mustang in Gray primer. The bodywork is pretty much done, but the doors, hood and other things need to be put back on car. I have a 289 and auto trans to go with the car. The car has a clean title. I am asking 3500 which is what I have invested in it. I can email more pictures...

67 Mustang Project - $2500 I have a 67 Mustang Project Car with a 289 and auto trans. The engine is not froze but I have never even tried to turn it over. The interior is all there, but just thrown in the car. I am asking 2500 or best offer. I have a clean title on the car. I can email...

I have a 66 Mustang, which I was told someone put 302 motor mounts in. It currently has no motor, but originally had a 289. I wanted to know if anyone knows if a 289 will fit on these mounts. Also is there anything I need to change since I am looking at a 289 engine that had a manual 3 speed...

I was wondering if anyone tried using a 95 GT to convert the brakes on a 67 Coupe. I have a 95 parts car and I was just wondering if it would work or not. Any help or comments would be appreciated. Thanks.

I am about to replace the gas tank in my 67. I was wondering if anyone had tried the kit available from CJ Pony Parts? I was going to order the one from JCWhitey, but nothing comes with it for a lot more money. You have to buy everything else seperately. The one from CJ Pony Parts come with...

I just put some new 40 series flowmasters and 3" tips on my 95 GT. I wanted to get some feedback on either BBK or Pypes X pipe (no cats). I currently have a BBK off road X pipe without cats on my 01 Bullitt and it sounds great. I know Pypes makes a stainless steel one, but I have read that...

This is a 94 Mustang GT with a 5.0 motor. It has a standard transmisson with gray interior all power. The car runs and drives. It needs paint, the top has some rust. The car also needs a new battery and a radio. It is in decent shape for its age. I have too many other projects one has to go. I...