Search results

  1. 95GTvert[bv12]

    For Sale F/S GeForce T5 26 Spline Input 2.95 1st & .59OD

    $800 obo SN95 T5 (94-95 5.0) with a Geforce Gearset. It needs to be refreshed. 5th gear Syncro is going out, so you need to double clutch it to get to 5th, and 3rd gear is making a ticking noise. Includes: Bellhousing Clutch Fork Ford Flywheel 26t Clutch Friction Plate and Spring Polyurethane...
  2. 95GTvert[bv12]

    After A Warm Start I Get Misfires At 2000rpms Under Light Load

    I've been trying to figure this out for way too long now. The problem used to be much worse but that was before I start throwing parts at it (see below). When I start the car up for the first time ever day it runs perfectly, I can drive it for an hour with no issues, Then if i park it and turn...
  3. 95GTvert[bv12]

    Brake Light Problem

    Did your brake lights work before? There's a "switch" on the top of the break pedal that tends to go out....Its a PITA to get to too
  4. 95GTvert[bv12]

    Why Does My Car Whistle????

    Mine started to do the same thing after a 70mm tb install, never found a leak. My guess is the screws in the tb flap were hanging out a bit and could be causing this. I plan on grinding mine down to see if it fixes it but i'll do that when i swap the intake....and maybe heads...hopefully some...
  5. 95GTvert[bv12]

    Car Randomly Dies While Running Good, New Dizz, New Tfi..etc

    I'm connecting it to the Connectors behind the passenger strut tower. According to the book that came with my reader 212 is: 212 - Loss of IDM (Ignition Diagnostic Monitor) input to EEC or SPOUT circuit grounded I put in the Summit Street & Strip Billet Distributor seen here...
  6. 95GTvert[bv12]

    Car Randomly Dies While Running Good, New Dizz, New Tfi..etc

    Before the issue I was doing some basic tune-up stuff, New Throttle body with new Sensors, New Ignition coil, New temp sensor, Check the plugs and wires. I also put in a 1/4 horse from moates which I haven't been able to use. It started running great. So I've been having an issue with my...
  7. 95GTvert[bv12]

    Tell me about this Quarter Horse tuner

    Anyone every Try TunePro RT, I too recently got back into it and decided to order a 1/4 horse since it seems to be the new hot thing but I haven't had much luck with it. Main goal for me is to turn off the high speed fan since i now only have a single speed fan, and adjust my speedometer to be...
  8. 95GTvert[bv12]

    Electrical Yes Another Ccrm Thread With Possible Solution

    http://www.summitracing.com/parts/sum-g4904/overview/ 2000cfm 13amp draw, install two if you need more. This fan with the summit universal aluminum radiator have keep my car cool in summer traffic.
  9. 95GTvert[bv12]

    Finally A New Convertible Top!!

    It's Done!: Glad to be rid of this old one: Now it's time to finish the interior.
  10. 95GTvert[bv12]

    Finally A New Convertible Top!!

    Ok so it's been awhile since I've posted here, but I'm finally starting to get my Mustang back into order. I have a long list of todos and some parts to install...so I expect to be posting more. After going back and forth a few times I decided on a Robbins Canvas top, because after seeing so...
  11. 95GTvert[bv12]

    Exhaust Smog Pump Delete

    I'm also interested in this if there is a write up? If not i look forward to the pics when you remove yours. It's time for my smog stuff and A/C to go (hasn't worked in years).
  12. 95GTvert[bv12]

    Electrical Radiator Fan Issues...thought I Fixed It

    I picked it up at Summit Racing the other day when i was in Reno, it's a 16" slim fan with 2000CFM flow, fits alot better then the stocker with the new aluminum Radiator (summit 2 row universal). I just wired it to the highspeed fan and it's on and staying on with the temp sensor unplugged so...
  13. 95GTvert[bv12]

    Electrical Radiator Fan Issues...thought I Fixed It

    Ok so i think i know the issue now. I wired the fan to the low speed wire and after driving it hard it got hotter then the low speed fan so now it won't turn the fan back on until i cools all the way down......Just a theory... because when i was idling around town before the up hill pull the...
  14. 95GTvert[bv12]

    Electrical Radiator Fan Issues...thought I Fixed It

    So i just put in a new radiator fan after taking the old one which could barely be spun by hand. The new Fan is a single speed aftermarket fan and at first glance all seemed to be well. I wired it up to the lowspeed wire (red wire) coming of the stock fan, the first time i turned it on it...
  15. 95GTvert[bv12]

    Six speed swap for a 5 speed?

    It's only a 9% difference so right now with 3.73's out back at 80mph the rpms are around 2200 with a .50 they would be 2000 rpms. I'm not sure 200 rpms are worth it.
  16. 95GTvert[bv12]

    Six speed swap for a 5 speed?

    http://www.astroperformance.com/files//A-5%20Gear%20Kit%20Information.pdf check this transmission out.
  17. 95GTvert[bv12]

    Six speed swap for a 5 speed?

    I have the same .59 O/D in my Geforce t-5 as the 6speeds do in the cobra. I also have the same 2.95 first gear. If you get a built t-5 then it's just like skipping 5th on a 6th speed.
  18. 95GTvert[bv12]

    Six speed swap for a 5 speed?

    No matter how you cut it your going to be spending over $3k and most likely over $4k for a 6 speed. What's wrong with a upgraded 5 speed with the gear ratio's you want?
  19. 95GTvert[bv12]

    New Radiator Time - Anyone with Pics of The Summit Universal

    You wouldn't happen to have an pics of the brackets on the top? What did you use to connect the overflow? and where did you put the CCRM? Sorry for all the question i'll be ordering this radiator to install next week, from what i've read it should be pretty easy to figure out, the over...
  20. 95GTvert[bv12]

    Six speed swap for a 5 speed?

    I think your biggest issue with the Chevy versions will be the shifter linkage, as i don't think it would line up as is and you may never get it to really shift right....If you were really going to put this much effort into it why not just go for a Corvette Transmission and shifter linkage then...