Search results

  1. Woodward_Dreams

    New & Improved 86 Mustang

    Looks amazing. Does your ashtray door actually work?
  2. Woodward_Dreams

    Fuel Issues with new Pump

    Yeah, it does
  3. Woodward_Dreams

    Fuel Issues with new Pump

    So my mustang wouldn't start and it was a fuel issue so i decided to replace the pump (i didnt know how old it was) So i replaced the fuel pump, and no dice. When i turn the key, it take about 3 or 4 key cycles to get the pressure up to about 40 psi. But it wont start. If i use carb clean or...
  4. Woodward_Dreams

    Fuel Problems

    Ok my car wasn't getting fuel so i decided to replace the pump, since i didnt know what condition it was in anyways. So i go and fire it up with the new pump and after about 5 minutes of driving it stutters pretty bad and i cant keep a normal speed. But if you shut it off and turn it back on...
  5. Woodward_Dreams

    Fuel Lines from tank

    Ok im replacing the fuel pump on my car and both flexible lines from the tank to the hard lines were pretty bad. so i ordered 2 replacement lines from Mustang 86-93 Fuel Supply Line, Tank To Filter, Fuel Injection Hose W/ Factory Connections, 5/16'', 5.0, at LRS - Same Day Shipping! and they fit...
  6. Woodward_Dreams

    Started the 84 t-top coupe

    Awesome work man. Im in love with your car.
  7. Woodward_Dreams

    Clutch slipping question

    Yeah im taking it easy. thanks guys
  8. Woodward_Dreams

    Clutch slipping question

    Ok it turns out that i did have the cable too tight. Now the car drives perfectly. thanks for the help guys.
  9. Woodward_Dreams

    Throw Out Bearing?

    Does the noise change when you put your foot on the clutch?
  10. Woodward_Dreams

    Clutch slipping question

    Thanks for the tips guys. ill get going on it tomorrow.
  11. Woodward_Dreams

    Clutch slipping question

    After reading a few previous posts on here, it looks like i most likely made the cable too tight so its still engaged. ill readjust it tomorrow.
  12. Woodward_Dreams

    Clutch slipping question

    Ok i replaced my clutch, pressure plate and had my flywheel machined this week. It has a new stock clutch and the engine is all stock too. However, at 75% throttle or more, the clutch starts to slip. i have only driven the car a couple miles so i dont burn it up again. I assume i did not adjust...
  13. Woodward_Dreams

    Mid West If You are in IL IN MI OH WI Register here

    New here, im from Farmington Hills MI White 85 Mustang
  14. Woodward_Dreams

    New 5.0 Stang

    It is an 85, the guy owns a business updating fox mustangs.
  15. Woodward_Dreams

    New 5.0 Stang

    True, but man im just so excited to finally get a fox body mustang
  16. Woodward_Dreams

    New 5.0 Stang

    Yeah ill have to double check that. The previous owner was not they guy who did the conversion. Ill check the code.
  17. Woodward_Dreams

    New 5.0 Stang

    The unibody is from an 85, the fenders ect are 89.
  18. Woodward_Dreams

    New 5.0 Stang

    Hi im new here, i just bought my first mustang today. Its an 85 5.0 with a 5 speed with an 89 body, engine and interior. It has a short throw shifter, a centerforce clutch and a set of flowmasters. other than that, its pretty much stock. the battery is in the trunk. Bill