Search results

Just did a h/c/i/ swap gt40 heads, explorer intake and a anderson n41 cam. 30# injectors and maf ect. car runs great, pulls hard. How ever when first started it will surge for 5 to 15 seconds then go to its normal idle. I read another post on here with simular issue with his trick flow swap. but...

thanks for all the help, Rick, current combo is mostly stock. c.a.i. full aftermkt. exhaust 4:10 and 150 hp n20 kit, have sitting on the bench gt-40 heads, explorer intake,1:6 rr"s 30# inj w/ c&l meeter .(so far)

Not choosing a cam just for idle. I want somthing that will pull hard but, I also want it to be lumpy, thats why im asking for advice so maby i wont have to go several cams be for I find what im looking for. thanks

picked up a set of gt-40 heads for a good price. Any one know how badly they will drop my comp. ratio from the e7's? not wanting to put alot of money into these heads, but do I need to have them milled? most cams im looking at want a minum of 9 to 1, not sure what it is stock, but will the...

Any one running an Anderson cam? Was gonna go with a TFS-1 but i want a lumpy idle and the TFS has a somewhat tame idle? The AFM cam is however about twice the price! Is it worth it?? I think it was the N-41 cam I was looking at??

Who knows, maby when our Fox"s are 40+ years old they may bring big $ too ?

I just got a set of Pro Form 1.6 pedistal mount roller rockers from Summit they were a good price, 175.00 I think they probly arnt as good as some of the high dollar rockers but my motor is mild and wont be turning a zillion rpms

About to start a h/c/i swap, my question is this. the car has the a/c systom intact and blows ice cold so I want to keep it, I know i can take the compressor loose and lay it out of the way with out cracking the lines open and loosing the charge (Ithink) but is it possible to get the cam out/in...

Four eyes rock, dont listen to Shaolin Crain!

NHRA un-leashed was here in town this weekend, first time I have gotten to see e/z street, true street and 10.5 outlaw cars run. those cars bad fast! good heads up index racing also. lots of fox body Mustangs!! Too bad at least half of them were Chevy powered?

looking to buy an intake, I have a stock bottom end with gt40 heads and a tfs 1 cam. my questions are, are cobra and explorer intakes the same? and do you think i would be off to spend a little more and buy a tfs intake to match the cam?

I dont think you over paid, Cars must be cheep where you guys live. Around here a 2500-3000 will get you a rusty p.o.s. in most cases, I think you did ok! And i.m.o. keep the gt tails, every one seems to be using the lx tails.

I know what you meen about guys talking crap, I sold my 01 ss camaro to a buddy at work, now he tells me how '' HIS '' Camaro can dust my mustang. ( then he wants me to help him when somthing is wrong with it )

Ok thank you for the help

Im all for saving the environment, the new hi flow cats are supposed to be great. But the way I see it all the semi trucks, not to mention all the souped up diesel pickups running around belching black smoke everywhere are far worse than our Mustangs that are only driven in good weather. But...

ok i need to adjust the timing, sounds simple enough. Reading the book im supposed to unplug the single wire connector located immediately above the harness connector.......Dont see/cant find it? have a 6 wire plug going to the module on side of dist. that same harness about an inch or so back...

Gathering parts to swap over to a set of gt-40 351 marine heads. this may be a stupid question..... do I need to use 351 or 302 pushrods? they have different part numbers in the summit book so they must be different??

Thanks guys !

Is there an easy way to get the fog/driving lights to come on with only the parking lights on? they only work when the head lights are on, and i would like to have them on w/o the head lights?

Bought my 90 gt last fall, it was someones project, and we all know about buying someones project!!Long story short, after changing just about every thing prev. owner had done I think ive got it right now. My question is this. the car had a bad high speed vibration I got a alum driveshaft and...