Search results

  1. 6

    Wierd disk brake setup

    disregard
  2. 6

    Machined block... but no main caps

    If you can use them I have a set of a ford 260 CID yours for the shipping.
  3. 6

    C2OZ-A vs. C3AZ-D Rod Differences

    The C2OZ-6200-A is for a ford v-8 221-260 The C3AZ-6200-D is for a ford v-8 260-289 Both will interchange According to this site/bottom of the page: Kelly hotrod - Ford Engines Page 1
  4. 6

    bellhousing

    Its a C5TA-6394-A according to this site it is for a 351 boss Bellhousings Found this site and it seems like a good place for checking Ford casting numbers. I checked it with the 289 flex plate I had and it match up perfectly. D.Hearne Thanks for the header info I will fit the bell for...
  5. 6

    bellhousing

    The price is right 23.00 dollars so going to take a chance on it. Thanks for the fast response.
  6. 6

    bellhousing

    Will a truck bellhousing for a 302 fit behind a 66 289? They are both 6 bolts. The bellhousing casting number starts with a C5 and is out of a 1970 ford pickup. Its going in a 65 mustang.
  7. 6

    Help 66 wont start

    Steering wheel being off is not the problem. More then likely the carb and possibly the timing.
  8. 6

    Granada and original brakes?

    Except for the Granada spindle. But they are re-manufacturing it. In the stock mustang configuration from what I understand.
  9. 6

    Granada and original brakes?

    64/2stang Granada parts are over the counter you just need to know the year of the donor vehicle or part number.
  10. 6

    Granada and original brakes?

    Thanks Dan, I Almost bought a set of disassembled mismatched parts .
  11. 6

    66 mod questions

    They do make a drop in fuel cell for the 66 but it is expensive. Let me take the opportunity to also thank you for your service. On the other stuff a search will turn up tons of info.
  12. 6

    Granada and original brakes?

    What about just the calipers? Thanks coolblue65.
  13. 6

    Granada and original brakes?

    Will the Granada rotor and caliper fit the original Kelsey Hayes spindles?
  14. 6

    Gauges for 65 Mustang

    Occasionally, I see them on ebay. always over priced.
  15. 6

    Door Adjustment on 65 Mustang

    Scribe or mark a line around the hinges or use tape so you can have a reference point to reset them. You really should not have to remove them. Just loosen them up a little and they should slide forward or backwards, but IIRC they can also drop down.
  16. 6

    Ford Part number help

    Can anyone please tell me what this part number is for: Ford C1AE 8A 080 C 2A 3
  17. 6

    Are 64 1/2 Stangs still sought after?

    I pulled the intake, water pump and a valve cover. scratch rebuilding the 260 something went off like a hand grenade in it, the block is shot! The assembly turns freely, but the damage to the block is bad. Who ever put this motor together had mad skills at laying silicone down. I have never...
  18. 6

    Are 64 1/2 Stangs still sought after?

    Finally figured out why I got mine so cheap, Its an Arizona car so no rust and in excellent shape. The oil pump shaft was gone . So I figured it was dropped in the oil pan. I pulled the oil pan out and was marveling at what was a fresh rebuild, the bottom end was absolutely spotless. I dumped...
  19. 6

    Are 64 1/2 Stangs still sought after?

    Just out of curiosity, why would anyone seek out a 64.5? or pay a premium price for one? Not putting them down, I just bought one and for the condition its in, I got it dirt cheap.
  20. 6

    Anybody running a C6 in an early Mustang?

    The small block C-6 fits. My nephew just installed one in his 65 . He is having trouble with the original shifter linkage rubbing on the tunnel.