Search results

Do the older 3.8s use pats? such as the pre 1999 single port 3.8s? Could I use that pcm? I know the 1999+ split port swap is popular for the 1994-1998 3.8 mustang and they use the original PCN

I checked my PMs. I didnt receive it. I'll look into the E150 ECU.

Any E150 year in particular? And I assume I can use an SCT to get a custom tune

I looked at the F150 ECUs and there is like a dozen listed for the 2001-up. How can I tell which one will work for me?

I had oil coming out of the dipstick on my 94 F150 with an EFI 302. Pulled the plugs, found oil on one. The rings were not sealing and compression was feeding down into the oil pan and having to go somewhere exited out the PCV valve and dipstick. Im afraid you have a bad ring. This would cause a...

Can I get from you the schematics for the 2001+ 4.2 F150 and the 2000 3.8? Also I assume that the 4.2/auto will swap easily to the 3.8/auto and that I can get a custom tune with an SCT tuner and make it all work. And i am thinking about pulling EVERYTHING out of the 2000 (harness wise) and...

It makes sense l. So the 4.2/auto PCU should work with the 3.8/auto? Not sure about how to wire the tach. I also wonder what is the best harness to use for the 68. It needs a new one. Hopefully 3 years of building missile launcher harnesses will pay off with this project.

Will the 3.8 harness plug into the F150 ECU? And how would i wire in gauges then?

Hm........ So I will need to pull the wiring from the cluster too, Question, what gauges will work with that wiring harness? I dont see anyway possible to use the 2000 cluster in it, I would like to wire gauges that fit the 68 bezel to the harness.

the car HAD an inline 200. It has NOTHING now, its just a shell that rolls. I HAVE everything from her totalled 2000 mustang. I was hoping for a swap-over

The 3.8 is capable of safely producing 300rwhp with the aid of an M112 or Pro-charger. The engine runs perfect, and fortunately though the car suffered a bad enough warp in the crash to produce ripples in the top and completely move the passenger front tire back, the engine seems unharmed. So I...

Well i had a lot of grand plans for my 68, but today my GF totalled her 2000 vert. So now we have a car sitting there with all kinds of good parts, cisc brakes, 3.8 V6/auto power seats, everything, nice car. Why cant I take gut the car and move it all over to the 68 and have a 27mpg driver for...

I talked to Ford Racing about that engine. The do not reccommend using it on the street. It is a drag only engine. The cam would have to be changed, its too aggressive for street use.

In my quest to find the “perfect” powerplant for the 68 coupe, I have looked at several options. Im building an old school hotrod, I have seen enough cars with a warmed over 302 or mediocre 351. The goal for the build is around 500hp, yet streetable. Power will be pushed through a TKO 600 into...

Is it hard to adapt a shaker to the 68 mustangs? I really like them, really thought about trying to incorporate it into my 68. Thanks for any info.

I like the idea of making my own, Trip or two to Lehmans pipe and steel and plus I can practice with welding. Good idea!

I am curious where is a good place to by a rotisserie for my Mustang, I am going to completely disassemble the car and will need a way to move it about and manuevre it. Maybe Northern tools? Im not sure where to get a decent one and how much is a fair price to pay. Thanks.

Nice work! Hoping to get the ball rolling on my 68 this fall. Keep up the good work!

My girlfriend took Welding in high school, and actually did very well, but im not sure what type they used, prob an arc welder. She really enjoys it, she actually ASKED me if she could help. (:D) So from the feedback I guess Mig is the way to go? Thanks for the imput guys!

I have to replace my floor pans in my 68 coupe, lot of little holes, I have decided to cut out the floor and put a complete new floor pan in it. Im new to Welding, my girlfriend has welded before she is going to help me (she is a keeper!) But im not sure what welder to use. I can pick up a cheap...