Search results

  1. M

    Building Motor to handle 200 shot???

    not sure if this helps, because as of now I am posting about how to get traction in the tech section..but, for what its worth. i have a stock block stroked and bored to 5.1l, forged crank, rods and je flat tops. My compression is about 10.5-10.6 by the math. I had my pi heads ported and...
  2. M

    2v nitrous build suggestions

    I will add a + for the victor jr intake. You can run it for cheap. your fuel rails will work if you fab a bracket and tap the intake, the spots are already there they just need holes. If you are running a huge amount of power then get the new rails, but a forged motor with a 150 wet shot will...
  3. M

    Need 60ft help

    the track I am at is known for having bad prep. It does not feel sticky to walk on, not at all. But there are cars alot faster than mine that hook ok. So iam going to try the bias plys and see how it goes. I looked and I can not fit 28s the way it sits. I may have to find a way to raise the...
  4. M

    problems, problems, problems...........

    the 1/8th still counts just focus on mph. Traction in first and second on street tires is not a good sign though. Best of luck too you.
  5. M

    Need 60ft help

    I will have to pony up for some et drags. I thank you guys for your time and I will post back in a month or so when the wife lets me buy a pair of bias plys. I will consider the front springs but as the car sits its already a touch squirly in the corners with the 90/10s if I go adjustable...
  6. M

    Need 60ft help

    I have tried easing it out and it works until I get to the gas, it just rips the tires off. I have eased it out to 1.87 but then I blew them off and killed the run before the 330. I just heat the ets until they squeel, no mega burn outs. Things is though this set up should be good for just...
  7. M

    Modification Survey Thread

    Car 2001 mustang gt Mods BBK shorty headers Not my choice, came with the car for free, I will be swaping to long tubes soon. Pypes offroad X good sound and good ground clearence Magnaflow mufflers dumped before the axle really good sound, sounds alot like an old fox body spec...
  8. M

    Need 60ft help

    no it is not a progressive. I have seen 275 tire cars leave with more gas, but those are totally diffrent animals. Is forking over for the progressive worth it, or do i have other underlying probblems. window is from 3000k-6400k also car is a manual with a stage 3 spec.
  9. M

    problems, problems, problems...........

    I know you said you were at 300/300 on the dyno, but have you ran it? What does it feel like? Do you have a friend with a 400 hp car to test aginst? Also take it to the track. When mine ws dynod on a mustang mine made 380hp/450ft when I went to a dyno jet it made 440 and 500. Not sure if...
  10. M

    Need 60ft help

    I have searched all the other suspension threads and can't find my answer, so here it goes. The car is an 01 gt with a stroker and N20. 440hp/500tq, coming by way of about a 200 shot. The car runs great after traction, in almost 3rd gear. My problem is that I can not get lower than a 1.95...
Top Bottom
Back
Forums
Menu