Search results

  1. gikort

    SOLD ISO 94-95 Crankshaft Pulley

    I appreciate the response. Yes, I was able to find one on ebay (I got ripped off). Thank you though!
  2. gikort

    SOLD ISO 94-95 Crankshaft Pulley

    Does anyone have a stock crankshaft pulley from a 94-95 Mustang GT or Cobra that they are not using?
  3. gikort

    Rear Disc Brake Conversion

    @Rusty67 Sorry for the long reply, I haven't been receiving notifications from this site for some reason. Anyway, I have been working on a solution to adapt the factory (65-73) handbrake cables into the SN95 calipers. I'm hoping to have them ready in the next few months.
  4. gikort

    Rear Disc Brake Conversion

    Quick update, with the help of another member, I was able to finish the brackets to mount 94-04 11.65" COBRA rear disc brakes to factory 8" and small-bearing 9" housings. These do require a minimum of 16" wheels but do not change the track width. Install photos below...
  5. gikort

    Rear Disc Brake Conversion

    Hey Guys, it's been a while since I posted. I developed a rear disc brake conversion kit that adapt 94-04 Mustang and Mustang GT rear disc brakes to the stock small-bearing 8 and 9 inch housings in early fords. I have been using them in my 67 coupe on both the street and track for several...
  6. gikort

    1,000+ Mile Vintage Race

    I'll be sure to post some photos of the event! Here are a couple of the route:
  7. gikort

    1,000+ Mile Vintage Race

    I'm working with the Rally Historico Transpeninsular, a vintage road race that runs the entire length of the Baja California - Tijuana to Cabo San Lucas, Mexico. This is the real deal - run full speed on closed public highways with some of the most beautiful scenery in the world. May 7-10, 2015...
  8. gikort

    SOLD 1867-68 Custom Deluxe Door Panels

    These door panels feature new, premium 1967 standard door panels retrofitted with a deluxe brushed aluminum insert to match factory or aftermarket deluxe brushed aluminum dash panels. They offer an exceptional alternative to the overpriced, complicated, and poor fitting reproduction plastic...
  9. gikort

    SOLD Torq Thrust D Bfg Radial T/a 215/60r15 Combo

    Like new set of 15x7 American Racing Torq Thrust D wheels with BF Goodwrich Radial T/A 215/60R15 tires. They have about 5k miles on them. http://www.ebay.com/itm/261444993556?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649 for more info and photos.
  10. gikort

    Moni Carlo Bar Question

    Here is my 67 with the HEI and curved Montecarlo bar:
  11. gikort

    help with carburetor choice

    Just rejet the secondaries of the carb you have now. They will have a number stamped on them. Just go up one number and try it, if its still too lean, then go up another number.
  12. gikort

    holley smooth no ping idle but try to maintain anything over 30

    What do your plugs look like?
  13. gikort

    Progress Thread Choosing Paint Scheme

    Damn that silver car looks good! haha. The last two I have done, I didn't decide the color until the car was in the booth, cleaned and ready to be painted! When I painted my buddies blue '72 chevy truck, it was in the booth ready and I talked him into letting me do it a copper color instead of...
  14. gikort

    Crane's 1968 Mustang Restomod

    Thank you. No I do not, I no longer own that '68. The one in my sig pic is my '67 that I still have. But I like where you are going with your paint ideas. Gold and black vinyl top will look great. I think a black hood and some sort of side stripe will look awesome too. Let us know what you...
  15. gikort

    Crane's 1968 Mustang Restomod

    I like that paint. Here is a '68 I did a while back. I just did the hood black, taillight panel, and a rocker stripe. It could look good in gold too.
  16. gikort

    borgeson steering done!

    Well i found the bill but not the specs. On a side note, my ps pump locked up this weekend.
  17. gikort

    borgeson steering done!

    Here is the link to my write-up http://forums.vintage-mustang.com/mod-custom-forum/636459-cheap-integrated-power-steering-write-up-pics.html I did a custom integrated set up with the same box that Borgeson uses. I used the factory power steering pump, so I just got the factory length belt from...
  18. gikort

    borgeson steering done!

    I'll see if I can find them when I go home this weekend. They might still be in my glove box.
  19. gikort

    borgeson steering done!

    Mine returns just fine. I would think proper toe-in would also have something to do with it.
  20. gikort

    looking for advice on a carb

    I don't have any experience with the Street Avenger, but I have had good luck with the regular 4160 600 cfm w/ vacuum sec on a 302, and I have a 4150 600 double pumper on my '67 306. It screams. I would not use anything else. I have had this carb on the car for about 7 years and have never...
Top Bottom
Back
Forums
Menu