Search results

I have a 65 stang and the defrost is absolutely worthless, is this common amongst all 65-66 stangs or is something seriously up with mine. I get about a 6" round area cleared out on the drivers side and a 10" long strip by 3" wide on the passenger side after forever of defrost being on full blast.

Have a 65 stang with a 289, stock 2 barrel, full exhaust and an electric fan, c4 auto and otherwise pretty basic. I run 87 octane, have timing set to about 8* advance, the air/fuel adjustment screws on the carb are both about 1.5 turns out (rich) and the car idling at about 1,000rpm...

So I noted yesterday that I had a couple dead cylinders when pulling wires from the distributor. This is a 289 that I just got running monday after it sat for 6 years. Anyways decided to change the plugs to see if that would cure the situation. One of the plugs had only a few thousandths for...

Rather curious of what kind of numbers you are putting down whether they are dyno or track if you have a mach with spray only or very minimal mods. I ran into one yesterday that was rather stout I thought. Pulled over and he says he just bought it (still had 30 day tags on it)... The car...

I have a vehicle with a clogged heater core and of course you have to pull the entire dash for it which I don't really feel like tackling such a job so I am curious if any of you have tried anything for unclogging a heater core WHILE still installed? The only thing I can think of is to...

I have a vibration on my car but haven't ever experience a bent rim before but these wheels came with the vehicle from the previous owner and all have curb rash. I am trying to get an idea of what kind of vibration it would cause as this vibration starts at 55mph and will be with me to any...

What would be the best tool for cutting right down the center of the runners on an upper plenum with? I am planning on shortening the intake on my stealth by about 2 inches and am gonna use my 5.0 intake as the guinea pig to learn on :) Thanks!

Do you have to prepare your fuel setup in any way to run Alcohol as your primary fuel source on a fuel injected setup? Do you have to lubricate the setup with some Marvel Mystery Oil or anything? Last but not least.... Anyone know what octane rating Alcohol is rated at? Thanks...

The torque converter cracked on my friends ride and spat out fluid everywhere for about 10-20 sec b4 it was killed out. He got a new TC and we replaced it tonight, got everything going and on the test drive after about 5 min of driving when shifting into 2nd gear we heard a pop and all the...