Search results

  1. a91what

    Is Steve (a91what) moving on from StangNet?

    Yo. Been :poo:ballz crazy busy lately guys. Scott our new CFO is a super cool rich dude that like to race and drift, he sponsors formula drift cars. He helped us put up the funding to make the purchase. I'm now a 1/3rd owner.... No sleep for the wicked But.... as my job demands I had to work...
  2. a91what

    Thoughts on using this setup on 351 build

    I did a 393w with 9:1 compression 190cc heads and a 224/236 600 lift cam twin 64mm turbos at 7psi I am very happy with it.
  3. a91what

    Build Thread Mustang5L5's Build Thread -

    I used to, the connectors have become unobtainium
  4. a91what

    Build Thread Mustang5L5's Build Thread -

    Installed correctly you will lose no functionality.... My MS3pro controls nearly everything in the car.. AC compressor cycle, fuel pump, fans, tones of sensor inputs, traction control and the list goes on..... You want a real in depth tune? --Main VE table tuned in ALPHA-N --Secondary table...
  5. a91what

    Service Provided Megasquirt ECU support and Tuning

    I dont use tunerpro often enough to feel comfortable helping with that
  6. a91what

    Any tuners in Phoenix area?

    I am not in the Phoenix area, but I do remote tune. You can email me at [email protected] I respond much faster through email. I can "track" or dyno tune the car if you can find a local shop that will let you rent the dyno.
  7. a91what

    Foxbody Megasquirt base map Timing Table.

    What matters is that the transition is smooth
  8. a91what

    Foxbody Megasquirt base map Timing Table.

    set the 100 kpa row from 2500 to redline to 29* and blend down to the 80kpa row and your good to go
  9. a91what

    From bad, to good to TERRIBLE. Please read

    This windows 11 ????? windows 11 nuked most of the rs232 drivers, it shows up in the comm ports but is not usable. You have to uninstall the driver and install a new one.
  10. a91what

    From bad, to good to TERRIBLE. Please read

    seems to me you hit the nightmare scenario when the ecu does not connect there is no need to load firmware, you just go up to the communications tab and try to detect the ecu
  11. a91what

    Fixed timing

    That is not normal no.
  12. a91what

    Fixed timing

    no it is not. are you pulling the spout? you no longer pull the spout with MS
  13. a91what

    Please Help! Ac idle up wiring megasquirt Ms2pnp

    AC idle up is already wired into the PNP. Turn on the AC idle up settings and start with adding 6% duty
  14. a91what

    Remote Tuning or help tuning

    I can help you with a remote tune, email me at [email protected] for details. I check in here about once a week so email is the fastest way to get ahold of me. If you just want advice I dont mind helping right here in the open forum, but again i dont check in but once or twice a week.
  15. a91what

    Decisions decisions Pro M or Holley Terminator X

    I do work with holley stuff, but personally I dont like it :shrug: I like being in control of every aspect of the software and holley locks you away from functions and tables like your a caveman with a screwdriver.. I dont enjoy having to create custom tables to do what I consider basic...
  16. a91what

    Decisions decisions Pro M or Holley Terminator X

    I have no good answer for this question. I sure hope not
  17. a91what

    AFR Gauge Correction

    The issue here is that the gauge you are attempting to use has a different scale than that of the spartan2 they will never match due to the scale difference. You will have to purchase a solid afr gauge from 14point7.com You also have the option of replacing the gauge with a perfect tuning...
  18. a91what

    Innovate LC-2 Problem

    If you are feeding the signal into a device that can display it, I much prefer the Spartan2 or Spartan3 from 14point7.com they are low cost and just work better than most of the others I have used.
  19. a91what

    Trouble with creating a megasquirt base tune

    Here you are, I did not setup the idle settings for you these can be tricky to dial in unless you know the procedure if I set them up in closed loop. I did setup the AFR, IGN, VE tables for you and scaled them for boost with safe values in the IGN table.
  20. a91what

    Digital Dash EFI Discount Code

    weird I did not get an alert for this tag