Search results

Why could it be that when it rains bad, my idle hangs at 2k of it'll either erratically and stall. Also driving it jerks, and rides rough. Only thing I can come up with, is the connection plug is getting wet for the o2 sensors? I have long tube headers so I have extensions and they do hang lower...

I replaced my starter with a reman, because previous has stopped engaging and blew my solenoid. Since, I have blown maybe 4 starter solenoid. In a week. Including the heavy duty 100 amp from Napa Before I get the mini starter, what should I check to be culprit? I've cleaned battery connection...

Car immediately dies, have to give it gas for a few seconds, idle really low like 500 RPM. I have issue bypass, egr made to stay open, idle at 750 when warm mostly. Stalls in shift, and at stop. Replaced act, and ect sensors. Fill mod list below. _____________ Crane Cams 1.72 roller rockers...

My car is not much of a looker, but the lights make it look better. And sound View: Another idle in 4k: http://youtu.be/q11EFXoojdo

Im really jealous of this coyote motor 2011+ GT around town. Most Incredible sounding car. Now my sound is real good. I know I can't ever chase that sound with my pushrod motor. But will aftermarket heads contribute to better sound? I have gt40p heads right now. I plan to get the tf fast as...

Currently fan hooked to ignition on. Hate it, takes power away and can't run ac. What if I wire my fan off the battery. Hot side to the heavy duty 75 amp continuous duty relay. Ground from that to battery, but I'll run a switch making or breaking the ground. Will this work well?

Hello guys, I have this problem off starter solenoids breaking. Couple days ago, I tried to crank but starter was spinning slow, sounding weird, so I popped the hood and cranked again when I saw the fender solenoid smoke. Solenoid Was very warm to the touch, and battery was warm to the touch...

Here is a video of a highway pull, Im wondering what can be done to increase RPM speed. To me, my RPM is slow, but builds speed fast. Maybe gears, aluminum driveshaft, lightweight flywheel? Watch "3rd gear roll on highway" on YouTube 3rd gear roll on highway: View: http://youtu.be/6oS0iTXFGuw...

I have a big problem. After I took the car for oil change, days after, my check engine oil light came on. I was thinking it was low so I took it back and they showed me where it leaked from the nylon tube out the sender. So I fix that, with new connection but same nylon to the mechanical gauge...

View: https://www.youtube.com/watch?v=C4pBxjM9IlM&feature=youtube_gdata_player Is this too much play? This has to contribute to the odd clicking I feel in the shifter as well as clunking sounds while in gear. Tomorrow I should be opening the case up.

It's rebuilt with less than 8k miles on it. So after I rebuilt my engine and hopped it up my tranny goes out. My car sound in second gear going 50mph and rolling on the throttle to the floor. So the car gets it. It was wet outside and I spin in 1st, shift into 2nd and it spins, shift into third...

My exhaust video here youtu.be/23wJ2BbrQMU I'm really glad the project came out great. Twice yesterday around 45mph it lit the tires up and got sideways. Here are my engine off codes 81-SecondaryAirDiverterCircuitFailure(O) 82-SecondaryAirBypassCircuitFailure(O) 85-CANPCircuitFailure(O)...

Weird idle. I'm guessing either because of my PA Performance alternator wire not hooked up, timing or low idle speed Anyone know why? View: https://www.youtube.com/watch?v=TYRyNLecH_k&feature=youtube_gdata_player View: https://www.youtube.com/watch?v=hRis3aVgP9w&feature=youtube_gdata_player...

Just because ain't it so pretty? I wish I could look at it like this every day Sent from my SPH-L720 using Tapatalk 4

And how easy is it to fix? I might attack it when I install my Eibach drag springs and upper lower control arms Sent from my SPH-L720 using Tapatalk 4

I looked and can not confirm Can I use my stock HO bolts for use with the explorers intake lower? I apparently didn't have enough explorer bolts when I went to install it. And the studs go into the throttle body right Sent from my SPH-L720 using Tapatalk 4

I just know this can't be stock, the one I pulled out. Pictured with it is my Tfs1 Sent from my SPH-L720 using Tapatalk 4

In place of my original.. how? It's not a direct plug and play it seems. Can someone help me out as to what goes where? Sent from my SPH-L720 using Tapatalk 4

I really can't decide what I wanna get, anyone have experience with these two specific sets, I don't want any other ones as I already had headache narrowing down and in my price range, thanks! Sent from my SPH-L720 using Tapatalk 4

The cam I took out, was supposedly advanced as the crank gear was on the key way at the advanced mark. So of course when I installed my Tfs1 cam, it's in advanced mark. (I do not have a degree wheel nor do I know how to use one, I'm terrible at math) I also didn't have a balancer pointer, but...