Search results

  1. Bob Hughes

    Drivetrain Rear Lower Control Arm Help

    Just wondering if anyone has the measurement from center to center of bushings on rear lca. I'm having issues with shearing off the support bolts on my umi lift bars and it's letting the rear twist when I launch. I don't want to weld the pivot brackets and make it a permanent item was thinking...
  2. Bob Hughes

    Mods To Reach 500hp

    Just talking out loud but if you're gonna buy an 02 cobra and dump $10000 in it why not just take that money and buy an 03-04? Now you've got the 6spd factory sc and with good exhaust pully cold air and tune would make in the 500 realm.
  3. Bob Hughes

    Need A Tuner In Delaware

    Performance evolution in Smyrna. Awesome guy there named Matt. Small shop but he's down to earth. Does great work
  4. Bob Hughes

    N2o And Stand Alone Fuel System....

    I posted this in the gt forum haven't heard figured cobra guys might have a little insight.....4.6 2v w/tork tech ported eaton Member In my never ending quest for more power I'm strongly considering a plate kit for the eaton on my car. My tuner was explaining to me that with the return less...
  5. Bob Hughes

    Forced Induction N2o And Stand Alone Fuel System

    In my never ending quest for more power I'm strongly considering a plate kit for the eaton on my car. My tuner was explaining to me that with the return less fuel system the sudden fuel demand between both the blower and nitrous thst I would have a ridiculous lean condition until the fuel...
  6. Bob Hughes

    1996 Mustang Clutch Snapped. Help!

    You can still push the pedal in to engage the switch just be sure it's in neutral as the car would launch if in gear when it fires
  7. Bob Hughes

    Bbk L/t Flange

    The off-road pipes run $125-$175 depending on brand and style. I believe you'll also need O2 sensor extensions and/or mil elimnators
  8. Bob Hughes

    Bbk L/t Flange

    Why not just get a short off road h/x pipe they're relatively inexpensive already have O2 bungs in place and will bolt right up
  9. Bob Hughes

    99 Engine Rebuild

    One is a Romeo and one is a Windsor. The main cap setup should be different. And whatever that hole is goes through to the timing area of the engine. Maybe just a vent to prevent built up pressure inside the timing cover but that's just me throwing an idea out
  10. Bob Hughes

    Fuel Fuel Psi Problem?

    That would lead me to think it's more of an iac or tps issue. Bevause the a/c triggers the iac to introduce more air into the inlet to counteract the load from the compressor
  11. Bob Hughes

    Fuel Fuel Psi Problem?

    I've had 2 go on me. One when I bought the car and the other I accidentally got wet with the hose. Both times ecu immediately threw a code. But if it was there before it's possible. Could do the old unplug trick listen for. Change in the idle. Do one at a time. Or there may be a way to test them...
  12. Bob Hughes

    Need Help! Need Advice For Super Charger On 03 Gt

    It should be a good setup. Just make sure you get a good tune before you go romping on it when it's together
  13. Bob Hughes

    Fuel Fuel Psi Problem?

    Normally if a coil goes you'll get a misfite code from that bad cylinder. Check around for any vacuum leaks. You mentions having replaced manifold maybe a connection was missed or damaged
  14. Bob Hughes

    Build Estimate?

    $50 an hour is cheap compared to NJ costs. A good performance shop runs $100 an hour out my way and I certainly wouldn't want just any repair shop inside my engine (I'd never let anyone in mine).
  15. Bob Hughes

    Need Help! Need Advice For Super Charger On 03 Gt

    Currently the cams are the set that come in the twisted wedge 2v kit. I don't have specs in front of me. But they're designed for n/a cars more than boosted applications. Down low lost torque until around 3500. I'm hoping to put the tvs in this coming January. Gonna need to either run twin pumps...
  16. Bob Hughes

    Need Help! Need Advice For Super Charger On 03 Gt

    Yea I dumped $12000 into my little 2v this winter
  17. Bob Hughes

    Fuel Fuel Psi Problem?

    At idle the rail will read app 28-30 die to engine vacuum compensation from frps. As throttle increases vacuum decrease more psi at rail port. Ideal psi is 40.
  18. Bob Hughes

    Need Help! Need Advice For Super Charger On 03 Gt

    Thanks it taken me a lot of time and money to get it there. I'd love to slap a 2.3 tvs on next year
  19. Imported Item

    Imported Item

  20. Imported Item

    Imported Item