Search results

  1. Exile

    Sn95' To Fox Throttle Body Tps Wiring Help

    So I am getting ready to do the Fox Mustang throttle body swap on my 95' 5.0 Mustang. Problem is I am having a hard time finding a Fox Mustang engine wiring harness that I can cut off the TPS sensor wiring pigtail with plastic connector to use... Are there any other years Ford cars/trucks that...
  2. Exile

    Some Questions About Custom Tunes

    I recently picked up a 95' GT 5.0 with the following... Rebuild 306 ci Forged Speed Pro pistons Stock intake & throttle body Ported heads with Crane 1.7 roller rockers B303 cam 30 lb injectors with matching MAF BBK cold air intake BBK headers, H-pipe, & Flows Mallory Distributor Custom...
  3. Exile

    Problems Bogging/stalling - Codes 84, 33, 13

    I am having a problem with this fox mustang... It starts right up every time, and the motor seems to run good/smooth reving it up and down while its in park. However when I go to drive it pulls good/hard in 1st gear, but when I shift into 2nd it seems to bog/stall and hesitate a little bit? but...
  4. Exile

    Help With Egr/intake Vacuum Problems

    So my 91' Fox got totaled, but the motor/trans were still good. So I recently picked up a 89' Fox Roller to swap the motor/trans into. Well I got the motor/trans installed, and it runs good at WOT. But if your just crusin at low rpm's and try to give it a bit of gas it falls on its face like...
  5. Exile

    Engine Rolled Mustang - Proper Steps On Getting The Motor Running?

    First off sorry for the long story, but figured I would get all the details in... So my buddy was out messing around in his super clean 91' Mustang GT yesterday, got it too sideways, went into a ditch and rolled the car on its roof. :nonono: The motor was still running for maybe a minute...
  6. Exile

    T5 Wont Go Into 1st Gear Now?

    1991 5.0 Mustang running & driving great for the last 6 months now... My buddy was getting on it in 1st gear, missed second gear, and now it wont go back in 1st gear? It still goes in all the other gears, and drives fine. It just dead stops, and wont even try to go back into 1st gear at all...
  7. Exile

    Cam Recommendations - Comp Xe270hr-12?

    I am getting ready to rebuild my motor, and would like to hear some cam recommendations for my built. I would like to stick with the 1.7 roller rockers for right now... 91' Mustang LX-Hatch (no smog or a/c) 302 (stock bottom end) GT40 Intake GT40 Heads Crane 1.7 Roller Rockers Crane Beehive...
  8. Exile

    Explorer Gt40 Heads Vs Cobra Gt40 Heads - Valve Springs?

    Explorer GT40 heads vs Cobra GT40 heads Im sure this has been discussed before, but I have searched, and havnt been able to find the answer... I know the Cobra GT40 heads came with upgraded Crane 1.7 roller rockers, but did the Cobra GT40 heads come with upgraded valve springs? If so what is...
  9. Exile

    Ticking, Smoking, Low Oil Pressure, Distributor/cam Gear Not Turning

    My buddy recently picked up a 1989 GT Mustang, and is now having some problems, and needs a lil help... 302 + 5-speed E7 heads (unknown whats been done to them) E303 cam Trick Flow upper & lower intake A/C & Smog delete Long tube headers Electric Fan The car runs good, but a few days after...
  10. Exile

    Suspension 91' Mustang Ball Joint Questions?

    I have a 91' Mustang, and am wanting to replace/upgrade everything on the front suspension. (ball joints, tie rods, steering rack, struts, springs, bushings, ect.) I read that when it comes to replacing the ball joints that your really suppose to replace the whole a-arm with new ball joints...
  11. Exile

    Wheels-Tires What style lugs nuts for knock off Weld Draglites?

    I picked up a set of knock off look alike 4-lug Weld Draglites (Summit or Jegs brand) for my 91' Mustang, and want to make sure I get the right lug nuts for them. I know real Weld rims take shank lug nuts, but I recall reading somewhere that the knock off Welds use regular lug nuts? But would...
  12. Exile

    Average going price for stock GT40 (3 bar) heads?

    I am debating on picking up a set of stock GT40 (3 bar) heads from a guy locally to go with my GT40 intake, but first I was wondering what the average going price for these GT40 (3 bar) heads are? I already know I will need to upgrade the springs, and please no "save your money for aluminum...
  13. Exile

    70mm MAF upgrade. 94'-95' Mustangs only?

    I have a 91' Mustang, and was gonna hit up the junk yards this weekend to see if I can find a 70mm MAF off of a newer year model Mustang for a cheap(er) upgrade. Everything I have read says to use a 70mm MAF off of a 94'-95' V6 or V8 Mustang? But my question is will the MAF off of a 96'-98'...
  14. Exile

    Why does the car want to die when you hit the brakes?

    My brother just got a 91' Coupe, 5-speed, 306, GT40 heads, big cam, demon carb, power brakes, vacuum canister, no power steering. Car runs strong, no problems, except when you get ready to come to a stop, when you hit the brakes the car acts like it wants to die, and sometimes will? It only...
  15. Exile

    Running rough, and revs up & down?

    I have a 91' 5.0 mustang, and when I left the house this morning it drove fine for about the first 5-10 minutes, but then it started missing/sputtering out of nowhere? And now when I come to a stop, or if it is just idling, it will idle up and down over and over from about 800 rpms to 1200 rpms...
  16. Exile

    Fuel What Size Injectors & Fuel Pump For My Combo?

    So I am starting to round up all the parts to complete a Trick Flow top end kit. I am also wanting to add say a 100 shot of nitrous on top of the kit (if the stock bottom end will handle it?), and am wondering what size injectors, and fuel pump I should go with? I would say with just the Trick...
  17. Exile

    Drivetrain 91' Mustang - Best Posi Unit For The Street?

    I have a 91' 5.0 Mustang LX-Hatch, and am getting ready to rebuild the 8.8 rear end. It has 4:10 gears with a mini spool in it now, and I absolutely hate driving it on the streets! What I do know so far is that the new rebuilt rear end will have 3:73 gears, and Moser 31 spline axles. But im...
  18. Exile

    Drivetrain Is A 95' Mustang Drive Shaft The Same As A 91' Mustang?

    Is the drive shaft from a 95' 5.0 Mustang (automatic) the same as the drive shaft from a 91' 5.0 Mustang? (standard) Would anything have to be changed? Or are they both direct swaps?
  19. Exile

    Engine Whats All Needed To Run Gt40 Heads On A Stock 302?

    I have a 91' 5.0 Mustang that is pretty much completely stock motor wise. I am looking at picking up a pair of GT40 heads that came off of a 96' 5.0 Explorer. My question is would it be ok/worth putting these heads on my completely stock 302 motor? (with aftermarket intake, cam, ect to come...
  20. Exile

    Engine New Water Pump/gasket Install. Is New Timing Cover Gasket Needed?

    I am getting ready to install a new Ford Racing standard flow water pump, and a Super Stant 180 high flow thermostat, but after doing some research on installing a new water pump, it looks like your suppose to change the timing cover gasket at the same time? And if your changing the timing cover...