Search results

  1. from6to8

    Bad ECT sensor causing this problem or what???

    how do I test that, ohm it out? On what setting? I'm not that familiar with a lot of the settings and such other than following a chart and such lol...... I do have actually a used pigtail that I splice in on the other car the one that got hit years ago and the harness is still good. I can...
  2. from6to8

    Bad ECT sensor causing this problem or what???

    do you think it's likely where I taped is the culprit and not anywhere along the wiring in the harness itself? (those same wires by the way)
  3. from6to8

    Bad ECT sensor causing this problem or what???

    what did they do to fix the bare wire issue? I know when I did the engine a few years ago I found the wires to the Ect plug one I believe just one was frayed so I taped it up good so it wouldn't touch the other eventually. I believe just some sheathing was broken but the wire was still intact. I...
  4. from6to8

    Ect Sensor Grounding

    what's up man I know this is an old post but my issues brought me to this thread. Btw I talked to you on the groups years ago when I was inquiring about doing a 351. Well here's my issue now with my 94 Cobra; ( from another thread) My issue is my fan is turning on when I start the car and I've...
  5. from6to8

    Bad ECT sensor causing this problem or what???

    So I pulled the codes and key on engine off I got 511 which is eec processor ROM test failed, 117 ECT sensor circuit grounded, and 564. There is no 564 in my Chilton manual so if I recall correctly when I googled what that is I have to double check but it didn't seem like anything significant in...
  6. from6to8

    Bad ECT sensor causing this problem or what???

    I'm pretty sure it was not doing this the many times I've driven it since the tune late January LOL
  7. from6to8

    Bad ECT sensor causing this problem or what???

    It's a sudden change and no not the tune.
  8. from6to8

    Bad ECT sensor causing this problem or what???

    i also tried another used CCRM that I had lying around actually likely the one that came off the stock 94 Cobra setup ( currently in the car is my 95 modded tuned setup out of my wrecked 95). I also have another 95 302 and will try that CCRM when I get home. The one I tried yesterday did not...
  9. from6to8

    Bad ECT sensor causing this problem or what???

    stock tuned ECU and not necessarily difficult starting on hot days it just does what it does when I go to take off. It's almost like once I release the clutch and if I haven't given it enough gas pedal or keep playing with the pedal while waiting for traffic to clear, it will die but will start...
  10. from6to8

    Bad ECT sensor causing this problem or what???

    ok not getting any code but noticed yesterday the fan jumped right on when I started it and it's never done that before. I had the car to the tuner for a retune the last part of Jan. and he said something to the effect of the car when warmed up it was still showing as reading only I think 1...
  11. from6to8

    Bad ECT sensor causing this problem or what???

    i know this is an older thread but if If the sensor is bad should I get a code at all?
  12. from6to8

    Suspension A not-so-low lowering spring

    ok gotcha and thanks
  13. from6to8

    Suspension A not-so-low lowering spring

    pics of the car?
  14. from6to8

    Suspension A not-so-low lowering spring

    cool sounds good. First chance I get I'll be removing them all
  15. from6to8

    Suspension A not-so-low lowering spring

    Same applies to the rear as far as removing the iso and getting more dropped right? I have Poly's in the rear so I need to get a little more drop too
  16. from6to8

    Suspension A not-so-low lowering spring

    Ok kool yeah that's the only thing is you want a certain drop but the isolators might make it a little higher than you want it so you got a gauge that and make adjustments
  17. from6to8

    Suspension A not-so-low lowering spring

    and I second this. The eibach pro's I would not do unless you want minimal drop. I actually have them on a second car and I'm even cut the springs just a tad, about a 1/4 which is a half at the car. I will remove the isolators on front and rear and just tape up and see how I like it and if...
  18. from6to8

    Sn95 to fox body throttle body conversion

    absolutely and thanks
  19. from6to8

    Build Thread Mustang5L5's Build Thread -

    Are those custom Terminator seats?
  20. from6to8

    Sn95 to fox body throttle body conversion

    yes that's what I've pretty much gathered over the past few weeks. Matter of fact it seems anything over a 75 for an SN you'll have to do the conversion; maybe actually over 70 as most of the intakes for SN's are going to be 70mm correct? If you went with a 75 I guess it'd make sense to port the...