Search results

  1. blown1989saleen

    Engine Getting Correct Tune For Throttle Body

    remove it and use the stock throttle body, throttle bodies do basically nothing for these cars. as you see, it's more trouble than its worth Sent from my iPhone using Tapatalk
  2. blown1989saleen

    5.0 Emblem Template. 2010-2014

    are you using emblems without locating pins? I can get measurements later this evening
  3. blown1989saleen

    Hurst Vs Mgw Shifter - My Experience

    I made the mistake of trying a Hurst, total junk!! I now have a Barton, which is leaps and bounds better than the Hurst. I will be changing over to the new gen 3 MGW in January
  4. blown1989saleen

    Tuner Inquiry

    Ford is going to tell you pound sand for 99% of any issues that pop up with your motor once tuned, so choose your tuner carefully and beat the brakes off your non stop and you'll be fine.......
  5. blown1989saleen

    Back In The Saddle, Head About To Explode From Pypes

    as said, if you want loud but no drone, get the Roush, I personally think they sound like :poo:, and just get worse with exhaust mods, if you want good clean sound with no drone, but a bit quieter, get the other mentioned gt500 ab's
  6. blown1989saleen

    Can Some Leaded Race Fuel Hurt Cats?

    not sure of the effects on the cats, but leaded fuel will almost instantly kill your costly O2 sensors
  7. blown1989saleen

    Kooks Header Touching Frame

    that's awesome man!! good to hear
  8. blown1989saleen

    Lowering Springs With Longtube Headers

    buddy of mine installed JBA's recently and they hang really low compared to my Pypes LT's, but I'm sure as long as you kinda stradle higher speed bumps you'll be fine
  9. blown1989saleen

    Kooks Header Touching Frame

    well no, it's normal at all. where is the header hitting? have you reach out to Kooks? all brands have fitment issues here and there, I'm sure they'll work with you to rectify the issue. I installed Pypes long tubes about 3wks ago and the drivers side was nearly hitting the floor board, they...
  10. blown1989saleen

    Looking For Some Axle Backs For My 5.0

    as long as you leave the rest of the exhaust stock, the Roush are decent, but they sound like garbage otherwise........
  11. blown1989saleen

    Re-torque Strut Nuts After Replacing?

    usually clunking up front is loose sway bar end links
  12. blown1989saleen

    Wheels-Tires Tpms Swap Cost - Same Size Wheels

    I didn't read all the replies, but what I can add is, the valve stems for tpms sensors are NOT as cheap as a standard valve stem, if I remember correctly I paid over $60 for four of them from the stealership, and when I checked ebay, they weren't much cheaper.........
  13. blown1989saleen

    2014 Gt Intake Silencer Removal??

    the stock air box untouched is more than capable of supporting lots of power, let it be.
  14. blown1989saleen

    2011 Gt 6mt 3.31 Rear Acceleration

    lol what are you talking about man?
  15. blown1989saleen

    Remove Window Louvres?

    the louvers come off so you can clean back there, just pull firmly while supporting the area around where the plastic velcro pieces are mounted, once the louver is off the car you can use a single edge razor blade to take the other plastic velcro piece of the window. there are three mounting...
  16. blown1989saleen

    Anyone Use Ford Racing Short Throw Shifter And 2post Bracket

    get the Barton, the Ford shifter and bracket are Barton pieces with their logo on it and priced much much higher. I have a Barton shifter and 2 post bracket and it is a great setup, precise shifts are the norm now
  17. blown1989saleen

    #8 Cylinder Fix

    really? that's your serious reply? you do realize there are other tuners with #8 failures right? Lund and BBR have also had failures, if you're gonna throw tuners names out there with #8 failures name others that have had issues as well
  18. blown1989saleen

    Post Pics of Your Mustang

    heres a couple cell phone pics I took tonight, just messing around with my Epic touch
  19. blown1989saleen

    Trying my Sync gps for first time any tips

    its really easy, I use mine quite often and I never bother with a computer 1. connect your phone via blue tooth 2. hit the voice button on the steering wheel 3. say services (at which point she'll ask whay type of services you want 4. say directions 5. she'll what address etc.
  20. blown1989saleen

    Trying my Sync gps for first time any tips

    youre talking about the nav that doesnt have the actual nav screen correct? be sure you have your phone thats connected via BT to Sync, then you can hit the voice button on the wheel and say services, then say directions and it will prompt you to say where you want to go, no need to use a...