Search results

ECU repair now 418 S. Euclid Avenue Marissa, Il, 62257 618-303-6957 Ask for Josh Bradley

ECM Depot DBA Auto ECM electronics in Grand Prairie Texas 75052 did not fix my ECU after two attempts. Even after I told them that I was not getting pulse ground to my injectors. I have sent my computer to Illinois, its been fixed and my car is operational again. The manager will not return my...

One of the reasons I am so frustrated by this situation is because I Have performed many of these checks. I have installed a new MSD Distributor, which means brand new pip/hall sensor. A new coil, EEC relay And fuel pump relay, and a new fuel pump. I have confirmed spark At the coil and at the...

Thanks for replying. Both i imagine. At this point the car doesnt even try to start. I would imagine if half of the injectors were firing, the car would at least try to start. Ive ran a code scanner, only to come up with a neutral switch code, but ive ignored that since the car doesnt even turn...

Gentlemen, I need to identify why my injectors are not opening I have 12 volts at the red wire, have back probed both wires with A noid light, which does not light during crank. I believe the signal Comes from the EEC....

About to swap my 89 EEC with my 86 EEC for troubleshooting. Confirmed spark from coil, and to plugs. Read 37 psi on fuel rail New EEC and fuel pump relays, new MSD distributor. Injectors are not opening in my opinion. I know the 86 is SD and the 89 is MAF. Am told it would start but run...

did you fix the issue?