Search results

its been awhile but i have found out the converter wasn't seated all the way in and the pump was also damage. so after fixing them two problems the line pressure were in spec.

can't really hear it because of open headers. there about 6 quarts and its not a vacuum modulator. all I'm asking is for someone that may have had this problem before. i have low line pressure.

i just rebuild a c4 transmission with a pa transmission rebuild kit. i having problems with low pressure in all gears but neutral. neutral is 5psi below the min which i thing is 55psi. the valve body is stock valve body with transgo shift kit (manual). i thinking its the front pump that is not...

I'm look for a front spoiler like on the outlaw cars and some of the x275 cars but just the lower part to covers the fog lights.

75 mm throttle body sold

i selling my efi stuff to put a carb on my mustang, i know that it doesn't make sense but i don't feel like spent more money just to get my car ready. so PM me with offers

finally take my car up to swarr auto to get a base tune on pms since my neighbor's want to complain about me having my car running at 430 pm on a Monday

Hope everything is going well on your car,that sucks the Msd took a crap on you after all that work. see you down in MIR

thank i check they are good. the problem i was having was the battery had low voltages and it wouldn't crank over all the way .:doh::doh: so i have to reset the idle and check the tps again and i should be good to go.

update the car is having a surging problem. i went though all the vacuum lines,cleaned MAF, cleaned IAC, reset the tps and idle. i had it running good when i reset the idle and once i turn the car off its having a hard time staying running like its turns over but the rpm are really low and then...

hopefully i can get to the track this week to test and tune the new combo

thanks ill look into them .

i was looking at that one, you just disconnect the tv cable and its full manual. i glad i have the old burned up trans because i can rebuild that one.:) more learning to come with rebuild the trans

I don't want to keep it but that's what I have to work with. Who Freddie brown? I'm newbie

Ya I'm probably going to stay with efi now. Does anybody use sliverfox vb because I don't want to do the shuffle because it kills the trans

I'm looking for a Anderson Pms for 90 foxbody.

ya i will. ya i just saw your write up on your car good luck with it. thanks.

ya true. i think i seen that last year running the 11.5 index. i always go to acto its an 1 hour away from me and i drive my car also to the track maybe one day ill stop by in the pits and talk if i see the car.

that's good time. you think you can get high ten's? I'm not scared but it is my first car I'm building so i going to need all the help i can get from other guy running nitrous. what i was going to do is get a wide-band and the pms so my air to fuel ratio is good and go from there with nitrous...