Search results

  1. 20Cobra01

    Oil cooler?

    Thanks, I am trying to pin point the leak now and see if I need new o rings. :(
  2. 20Cobra01

    Oil cooler?

    I changed oil today with no problems. Before I went to start the car I checked everything and noticed a couple of coolant drips at the lower lip of the oil cooler. They seem to be just antifreeze and I looked at the used oil which looks good. My question is there anything that can loosen up...
  3. 20Cobra01

    Has any one changed their own gears?

    When I changed mine I dropped the whole subframe. You don't have to do it this way but it wasn't that hard. The only reason is that I put subframe bushings and narrowed the rear brackets for 10.5" rims. Either way you have to do about the same amount of work.
  4. 20Cobra01

    spline count on '01 Cobra rear?

    The 01 has 31 spline. The 99 has 28.
  5. 20Cobra01

    im looking for exhuast, what should i get

    Try the search feature, there are thousands of threads on this topic Magnaflow and Bassani both make good components and sound similar. Bassani being a little higher in price. IMHO borla is to expensive and I really don't like the sound, but that's just me. And then there is Flowmaster...
  6. 20Cobra01

    H&R Super Sports????

    Yep, the SS are definetly navy bule and should say H&R on them. Come to think about it, H&R is printed upside down. May it was it was Montag when they made them. :shrug:
  7. 20Cobra01

    Charging A/C have a few ?'s

    I am by no means telling someone to charge a system as a liqiud. I am just saying that I do sometimes for certain reasons. The time the liquid gets to the compressor it will boil off to a vapor.(unless you just carelessly dump it in.) Remember IF the compressor is running it with be warm...
  8. 20Cobra01

    Charging A/C have a few ?'s

    Yes, but he is using a little can, not a 30Lb jug with a 1/2 hose. By the time that the liquid gets to the compressor it will be evaporated. If you try to get every last ounce out of the can in vapor form it will be very hard. Like someone else said put it in a bucket of hot water, it raises...
  9. 20Cobra01

    Some Clarification: '03 Mach 1 vs '01 Cobra

    Ok, you should have saved your money and bought the V6, you wasted it on a badge! :rlaugh: just kidding nice car. What do you get when you take a mustang, a monkey, and a dohc V8 and put them together?
  10. 20Cobra01

    3.73 Gear Ratio for '03 Cobra????

    No 99's have a T45, 01's have the T3650
  11. 20Cobra01

    Anybody know a good way to get the gear oil out of a Cobra?

    Can't think of an easy way, but like Lopony said. Do the drain plug mod, it works great!
  12. 20Cobra01

    homemade MIL's

    I don't have the drawing, but if you do a search you should be able to find one. Pretty simple just need some radio shack parts and be able to splice them in to your O2's. Off hand I think you need two 1 meg ohm resistors(1/2 or 1/4 watt) and two 1 micro farad capacitors.
  13. 20Cobra01

    alternator pully...Impossible?

    I changed mine with an air rachet. Find someone who will let you borrow or oversee your useof an impact gun, the alternator pulley only takes five minutes. BTW, I am running Steeda underdrives and if I remember the stock and steeda pulley are the same size. Don't know if that helps or not...
  14. 20Cobra01

    AFS Center Caps

    I have AFS 03 cobras 17x9 and 17x10.5 polished. Sorry no pictures on this computer.
  15. 20Cobra01

    ??? for 99+ cobra's with AFS wheels

    If you got your wheels from AFS they should provide you with two "button head" bolts(basically a socket head cap screw/carriage bolt). They replace the two rear IRS subframe bolts. If you plan on running 315 you will need a spacer too. Some people are running Nittos with no spacer and a...
  16. 20Cobra01

    AFS Center Caps

    I think they should work. The stock cap and the afs cap are the same size. I have the stock caps in my AFS wheels and they fit perfect. The only difference in the caps are the metal retainer rings on the stock ones.
  17. 20Cobra01

    Who knows about Pmachy's cobra

    I would guess that was probably and o/r x. It's hard to tell. One thing is for sure, it sounded bad@$$! I think I am going to have to get some paks! :nice:
  18. 20Cobra01

    Whats quicker? Mach1/2001 Cobra

    I did a search and read some of SVOKING's post since he started trolling here. They basically say the same thing over and over again. The Mach I is better than your car(whatever you own) and he/she just bashes everyone on any topic. This is a svt talk thread about the mach1/cobra. Some people...
  19. 20Cobra01

    2001 Cobra? New Mach 1?

    You are absolutely right.........the Mach 1 motor has nothing to do with a cobra motor. They came out with it just for the Mach and it's design was based on FE motors right....... :lol: You should get a clue dude! I love all mustangs and always will. When I bought my 01 in 01, there was no...
  20. 20Cobra01

    will 315's /11 inch rims fit on the rear of a 99 cobra

    I am running 315 BFG KD's on AFS 10.5" 03 cobras. You will need the button head bolt and spacers to clear everything. I didn't use the spacers because I narrowed the rear subframe bracket. Remember that BFG's run wide compared to Nittos, etc. You might be able to get away with just one or...
Top Bottom
Back
Forums
Menu