Search results

  1. JimmyRGT

    electrical nightmare

    OK so driving home from work a few days, the voltage suddenly drops very low, the battery light comes on, and the car barely makes it home. Of course it will not restart and the battery is completely drained. I get the alternator checked and it is bad, same with the battery so I replace them...
  2. JimmyRGT

    starting problem

    Ok its woo late for me to test anything tonight, but i did try to pinpoint the squeak and it sounded like it was coming from the power steering/ Ac pump area...I will test the pulleys tommorow and then i guess try to get the starter tested. Where could I go to get the starteer tested? Thanks...
  3. JimmyRGT

    starting problem

    It sounds like the car wants to start but cant turn over the first time. It also makes a squeaking sounds while it tries to start. By turn over i mean that womp womp sound it does before it starts every time. It makes it through half a womp, then stops. Im lost.
  4. JimmyRGT

    starting problem

    Which connections? I ruled out the battery by first trying to have it jumped off, and then having my brother come up who also drives a mustang, and puting his battery in my car. Same problem remained.
  5. JimmyRGT

    starting problem

    Hey guys, havnt been here in a while but now im back. So im driving the car today (its a 95 GT) and it has been running fine. Only unusual thing is that recently when i start it cold it had a small delay before it started up. By that i mean i would turn the key, and there would be silence then...
  6. JimmyRGT

    fuel pump kill switch in a 95

    thanks a lot
  7. JimmyRGT

    fuel pump kill switch in a 95

    Hey guys Im moving into an apartmen and want to install a fuel pump kill switch on my car. Iv read the posts about the pre 95 5.0's and i was wondering if our cars have the fuel pump relay under the drivers seat as well, and if so what color wire would i splice, etc. Also is there a certain type...
  8. JimmyRGT

    95 cobra R rim question

    this is a cobra r
  9. JimmyRGT

    95 cobra R rim question

    Hey I have them and one is cracked. Is it possible to get a ripoff cobra R rim and replace the center cap with the Ford one? I know it is wrong but Im broke and need to get it replaced.
  10. JimmyRGT

    Stock hood, strut tower clearance

    Alright well the tower brace will go, i might go with the 3/8th spacer though just to be sure. Do i have to get different intake bolts if i get the spacer or are the ones that come with the intake long enough? Or does the spacer come with a nne set of bolts? Thanks for the help.
  11. JimmyRGT

    Stock hood, strut tower clearance

    How big of a spacer can i fit before the hood becomes a problem?
  12. JimmyRGT

    Atlanta area machine shops???

    Hey guys Im about to buy some used Edelbrock heads for the ole stang and want to get then CNC'd before they go on the car. Where are the good machine shops in the area? Im more concerned about quality work than i am the price. Thanks for the help.
  13. JimmyRGT

    Barrett Parkway Sat. 6/26

    Im in France right now...yes go ahead make fun of me i better than anyone know how much it sucks but when i get back im gonna join the club. Would love to meet yall some night, iv been up to Barrett a few times and Iv probobly seen you. Of course Im also doing a head, intake, TB swap when i get...
  14. JimmyRGT

    Stock hood, strut tower clearance

    Stock hood, strut tower bar clearance Hey guys Im about to do a Head, Intake, TB swap on the ole stang. Goin with edelbrock performers, trick flow street heat and a BBK 70mm. Will this fit under the stock hood and strut tower bar or will i need to replace one or both of them? Thanks for the...
  15. JimmyRGT

    New wing installed- pics

    man iv got the same wing on my yellow one, i love it good choice
  16. JimmyRGT

    Flowmasters with H-Pipes

    Man I love it. Iv got the same car with the MAC offroad H-pipe and the flowmasters. It turns every head when i go by. I also have the MAC shorty headers which helps a little too. But i would say yeh if you want that true mustang sound, flowmasters and an O/R are the way to go.
  17. JimmyRGT

    cost to machine heads?

    anyone?
  18. JimmyRGT

    cost to machine heads?

    anyone had this done before? The reason I ask is that I am considering buying some Edelbrock heads with 70000 miles on them for pretty cheap. Is it worth it to buy heads with this many miles and have them cleaned up? Please shoot some advice my way i want some before I make this kind of...
  19. JimmyRGT

    cost to machine heads?

    Hey guys Im about to buy some heads for the ole stang. If i buy used ones i will probobly want to have them machined and possibly ported. How much does it generally cost to get them CNC'd and or stage 1 ported? Thanks for the info.
  20. JimmyRGT

    which heads do i get?

    Well i didnt know that the Edelbrock and Twisted Wedge heads didnt come CNC'd and that the Afr heads did. Is it necessary to get the Edel and TW heads done before they can be installed? I will be buying heads very soon and want to make sure I have all of the information before I put down that...
Top Bottom
Back
Forums
Menu