Search results

I had posted this ongoing mess earlier stay away from blue moons control freak upper and lower arms they will not work with stock coil spring , lower arm has interference and bushing issues so I would not recommend the coil over either I have returned mine and am going with t.c.p. arms the owner...

I have a 70 coupe under the dash around fusebox area is a plastic box with ford # it has a couple wires and couple vacuum lines any ide what it is ? also have taillights but no hazard , turn signal or brake light on driver side the green with orange wire has no power traced as far as I could...

all this mess started cause I order the 1 inch drop kit from mustangs unlimited which at the time listed it as 67 -70 did not specify 3 or 4 bolt ball joints , they have since updated catalog. received kit it came with a 4bolt wedge to be installed under ball joint but the arm they sent me had 3...

based on my on going bad experience I would recommend avoiding blue moons control freak suspensions even if you plan to buy the coil over . I would recommend global west or t.c.p. products . if buying anything other than sheet metal from mustangs unlimited , due your research , then due some...

have a 2011 roush stage 2 with the upgraded brakes and suspension options . getting some bad noise from suspension when first start driving . have heard it a few times in warm weather mainly after it has set for a while , but very noticeable in the cold . I know the abs can make some noise as...

still looking for any one who has successfully installed either control freak or global west tubular a- arms with stock coil springs

looking for anyone who has installed either control freak or global west a - arms . when I tried to install spring and release it the spring was bowed out due to the spring seat hitting the cross tube on upper arm not allowing the seat to rock backwards and set level