Search results

17x8 and 17x 7” not really big/little more like little little lol.

Got it going! So happy! Put about 1000 miles on it Took it to Dyno !!! Made 519/460 to the wheels Actually made about 100 hp over my best guess So now I’m considering a new dart block possibility 331. Now that I’ve had my fun, it’s time to finish sound deadener, interior and...

Ran fuel and battery cables. I used e85 compatible 3/8” feed 3/8” return hose made my red horse. It’s easy to work with and takes a 2.5” bend radius.

Working on fuel lines and trunk mount battery cable routing For The 65 now. Been thinking about this looking at post of different ways. Came up with something I think is really slick. I’m sure someone has done this but I thought of it myself and I’m pretty proud So I found a way to make my...

I’ll be the third or fourth one to recommend Dynomax super turbos Those should sound Really smooth with a turbocharger only thing is you have to make sure you get the biggest one that will fit. Also. The off set /off set configuration is the best flowing one as it has the curved deflectors...

Thanks! all tig welded Stainless Only part of the build I haven’t done myself (besides some machine work) I knew I wanted mike to do the exhaust years ago after seeing one of his jobs. It’s not easy running 2.75” dual Exhaust over axle and through valance with H pipe around 9” and pan hard...

Got the exhaust done. Mike Maier of Mike Maier inc. did a great job. all stainless and mandrel bent. 2.75” with Birka pro xs. Mufflers. Also welded in my x brace and installed pan hard bar with incorporated cal tracs.

-New 3g 95 amp alt -Coolant reservoir installed -Fit fenders and hood -New lower valance, grill, bumper and fog light kit -Installed original GT rear valance with duel exhaust cutouts -installed new backup light kit -Ran all front light wires -Installed bypass valve -Replaced 86-93...

I think long tubes are usually quieter than short tubes and the cam lift, duration and lobe separation plays a part too. I like my ride to always be faster than it sounds Just purchased super turbo mufflers for my supercharged 306 with Shortys and 2.5” over axle with @5.70 lift 222 / 232...

Thanks for the suggestions No criticism taken at all. And I really appreciate your time taken to help! I originally wanted to install Anderson power pipe just as the fox body’s were. I actually purchased the $250 kit as I figured if I had it in hand I’d surly be able to install. The...

Got this finished Thanks for all the help and suggestions I ended up using to 90° elbow’s couple together and made up a mass air meter support to basically mount mass air meter and filter to the engine to keep it from shaking too much had to do a light trim on fender apron that I Covered...

Supercharger air inlet installed. I used 3.5” to 4” 90* rubber elbow from 3.5” inlet to supercharger then 4” cast aluminum 90* elbow to make a tight shock tower hugging fit. Some trimming of the fender apron was necessary to clear the cast elbow. I used vacuum hose to trim edges on...

Got more done! Installed larger pinion brg support and changed from 4:11 to 3:55 The 4:11 would of been good for naturaly asperated but I’d be running out of gear in 1/4. Next step order new aluminum drive line

I’d mix up some dish soap and water in spray bottle, soak up all suspicious areas then start car up and look for the leak. It should be pretty obvious with the soap bubbles foaming from leak area. Also, if your using “T bolt” clamps on hoses or couplers they can sometimes be more prone to...

I’m in the same situation as you. Wife and I I like our cars clean. But live in the country with horses and 1/2mi gravel fire road to get home. I was just telling friend of mine (who has all of his race/ hot rods still in primer ) about the nice paint/body work I’m planning on getting...

I’m only using the mustangs to fear “jack pad” and radiator core support I have fat man fabrication strut kit that uses manual rack and pinion steering If steering is too difficult I can always add the electric power steering option to my steering column I’m using mike Meier’s mod full...

Yeah that Porta power belongs a frame and auto body collision friend of mine. He is the one who noticed the frame wasn’t 100% square Knowledgeable friends are priceless!! Especially when they have awesome tools. Do you see that transom bar or bubble level in the picture with the...

I remember installing my sub frame connectors on 89 GT well over 20 years ago biggest difference of any suspension mod I did with the car. Transformed it from a mushy flexing mess to something that inspired spirited driving. I will never forget the first time I pulled into a driveway...

Thanks. Yes. I had my build thread going but it had been a while so since you reminded me about it I’ve been slowly adding to it to keep it up-to-date I just have a few minutes today to add to it so that’s what I’ve been doing I had an 89GT few years out of high school about 25 years ago and...

Had to address pushed in frame on passenger side Also battery tray and inner fender was damaged badly and looked like crap. So I cut it all out, pulled the frame out about 3/8” and welded in new inner fender, lower brace and mustangs to fear radiator core support