Search results

  1. Stanger007

    11.01 @ 127.65 and Some Carnage!!!

    In preparation for a real motor I've been pushing progressively harder and harder on my stock 153,000mi bottomend. Dyno'd it Saturday night at 485rwhp at 6000rpm, right at 16psi measured with some tire slip. Sunday for the track temp was about 61*F out, around 400DA. Made about five passes...
  2. Stanger007

    New Track Times/Dyno #s from the Daily Driver

    Took the ole' daily driver out to the track a few weekends ago for the shakedown runs since adding a meth kit. Dyno video 476/444tq @ 6000 476hp / 444tq @ 15.5psi / 6000rpm on Flickr - Photo Sharing! Track nite was just over 1800' density altitude. Busy night so I only got two runs, first was...
  3. Stanger007

    C16 vs 93 Octane and boost

    I recently did some testing of C16 vs 93 octane on a 04 Cobra with light modifications. In the process of tuning I pushed the car to make max torque on both 93 octane and then on C16. Had some interesting results on this mild combo so I figured it would be a good topic for discussion. This isn't...
  4. Stanger007

    First Look at a New Tuning Option

    Made a little video last nite of the progress that has been made with the Moates.net Quarterhorse/ Clint Garrity's BinaryEditor More pics and info here Stay tuned for a video of me tuning a car on the dyno in realtime. :D Wes
  5. Stanger007

    Dyno #s

    Thought I'd post up a tune from last nite that is fairly typical and gives Grady some more fodder to play with. :D Last pull (and chart below) was done in "DynoJet" mode on the MustangDyne (which in my experience is still about 3% less than the DynoJets around us but good enough for comparison)...
  6. Stanger007

    Who's going to Pinks in Belle Rose this weekend?

    Anyone attending the arm drop race in Belle Rose, LA this weekend? Stop by and give me a shout, I'll be running around with the TPS crew. Wes
  7. Stanger007

    Free Time + Dyno =

    Finished up early tuning on Sunday so we decided to strap down the pimp van... Dyno Pull Dyno Chart :) Wes
  8. Stanger007

    Grand Opening Pics!

    Since this is my favorite sub forum to read, I wanted to share a few pics with ya'll from our grand opening dyno day. We had an excellent turnout and dyno'd some amazing cars from around the state. Sage2k and Andy from here showed up to support the 94/95 crowd and we had a couple other 94/95s in...
  9. Stanger007

    FUN: iPhone Dyno

    Gtech meets iPhone: Dynolicious turns iPhone into cheap performance meter - Autoblog Wes
  10. Stanger007

    Good Price on 8" Rebuild?

    It's time to rebuild the 8". I pulled it this evening and decided I need new bearings, seals and ring and pinion etc. I am having a tough time finding 8" 3.00:1 ring and pinion sets - does anyone have a good source for them? How about master bearing kits as well? Thanks! Wes
  11. Stanger007

    Current NHRA Roll-cage Required Times?

    Does anyone know what this year's ET requirement for a roll cage is in CONVERTIBLES? Wes
  12. Stanger007

    Price shopping for 3.73, Superior 31-spline and Cobra diff

    Hey guys, I need to degear my car a bit so it is not topping out at the track. I'm also taking the opportunity to make the bump to 31spline so that I can run my ET Streets. Where are the best prices going for FMS 3.73s, Superior 31 spline axles and Cobra differential? Hmm and to make this...
  13. Stanger007

    Adjustable or Positive Stop???

    I feel like an idiot asking this but are these pressed in rocker studs for adjustable rocker arms or positive stop? I'm having an issue w/ the rockers coming loose but I have been setting them up like adjustable rockers. :D
  14. Stanger007

    Picture Request - EGR / Air Pump Vacuum Routing

    I need digital pictures (not a diagram) of a *stock* vacuum routing for a 94-95 Mustang. Pictures following the vacuum lines from the tree on the intake, into the fender and back out again to the air pump and EGR would be most helpful. Thanks! Wes
  15. Stanger007

    Fun Ford Weekend - May 23-25th - Who's Going?

    Hey who is headed out to the upcoming Fun Ford Weekend @ No Problem Raceway in Louisiana? http://www.funfordevents.com/index.php?src=directory&view=ffwschedule&srctype=display&back=ffwschedule&refno=2126&submenu=Events&pos=0,20,10 Wes
  16. Stanger007

    Thoughts needed - online "How to Tune VIDEOS"

    I'm tossing around the idea of a "Tuning School" series of 10-20min videos walking through a couple complete tunes, along with datalogs, tune files etc. I would walk through how to tune a N/A and blown car using twEECer/Moates.NET chips. My hold up is that it is going to take a LOT of time to...
  17. Stanger007

    tunexchange - New community tuning site!

    After being in the tuning community for several years both as a tuner and helping others get started, I've noticed that everyone new to tuning has the same hangups. ACCURATE information is hard to find, the software is oftentimes difficult to use even when you do have what you think are the...
  18. Stanger007

    Turn Signal Switch - '72 Mach 1

    Does anyone know where I can find the broken part of the turn signal switch in the picture? Thanks, Wes
  19. Stanger007

    Mustang Chat Rooms

    Anyone know of a good one -- looking for something to pop into during the day when I'm bored at work. If not, want to start one? :) Wes
  20. Stanger007

    EFI on '72 Mach 1

    I'm itching for a new project and would like to convert my '72 over to EFI. There was a guy on here that I PM'd with that had it done and I lost his screenname. I'm looking for some install pics and any words of advice and "gotchas" involved. I think the A9L computer is going to be my best...