Search results

  1. Angus

    05 GT vs MACH1 race RESULTS.....thats right...RESULTS!

    I'll wait until the '05 actually hits the street & dragstrip before judging the car or calling BS... :nice:
  2. Angus

    Official Tremec 3650 Issues Thread

    The Cobra 6 spd doesn't have a steeper 1st gear - it has a less aggressive 1st gear actually. The Cobra 6-spd 1st gear is 2.97 with a 2.07/2nd, 1.43/3rd,1.00/4th, .80/5th & .62/6th. (I've also seen 2.66/1.78/1.30/1.00/.74/.50 listed for the Cobra/Viper 6-speed - not sure which one is...
  3. Angus

    Mach 1 MACH 1 310HP is wrong...

    I tell anyone who asks my RWHP numbers. This is the most accurate to me, and I can easily back it up when someone cries "BS"... :D
  4. Angus

    Mach 1 MACH 1 310HP is wrong...

    So what's wrong with a little under-rated power? Getting more hp/tq than you payed for (or expected) is always a good thing... :nice:
  5. Angus

    Mach 1 What did you guys pay for you Mach 1

    I bought mine last year for ~ $23,000. This included the $3000.00 rebate, X-Plan & dealer discount.
  6. Angus

    Mach 1 Now in the 12's....

    I meant running a 12.5X vs a 12.8X with just a tire/wheel swap compared to my current set-up... :)
  7. Angus

    Mach 1 Now in the 12's....

    Thanks guys! I can't wait to run the car with slicks & skinnies - it'd be nice to run a 12.5X with nothing but a tire/wheel swap... :D
  8. Angus

    Mach 1 Now in the 12's....

    Skipped right over the 12.9X's & ran a 12.855 @ 107.39 mph! Backed that pass up with a 12.857 @ 106.84 & a 12.975 @ 106.65. It's great to finally be out of the 13.00X's... :D All the gory details of the best passes: 12:00 PM R/T............ .738 60'...........1.785...
  9. Angus

    Mach 1 Stock Mach 1 Vs stock LS1

    Racing on the street is about as close to racing at the strip as an '03 Cobra is to a stock 80's Escort GT... :rlaugh: Yeah, they're both the same thing... :rolleyes:
  10. Angus

    lightweight rims???

    You could try the Konigs from Maximum Motorsports. They are a similar style, about the same weight (21/22 lbs) but are ~ $40 cheaper per wheel: Konig Villian Wheels at MM
  11. Angus

    Mach 1 Stock Mach 1 Vs stock LS1

    Yeah, keep dreamin' buddy. :rolleyes: I have a stack of timeslips (& videos ;) ) that say otherwise... :D
  12. Angus

    TSB is out for TR 3650

    FINALLY... :rolleyes:
  13. Angus

    Widening Stock Wheels???

    (This question doesn't apply to the '03/'04 Cobra guys, who can buy the AFS 10.5" wheels...) Has anyone had stock Ford 17 X 8" wheels widened??? I've given-up on anyone making the stock Mach 1 machined-finish in a wider size, but still want 10.5's in the back... :D I know it won't be...
  14. Angus

    Solid A and about time

    You'll love the solid axle. When set-up correctly, they ride pretty decent & launch even better.... :nice:
  15. Angus

    Mach 1 what are the best mods for a mach1?

    Yeah, I left-out the axle upgrade due to a momentary lapse in judgement. :bang: I did the 4.30's/31-spline Superiors/31-spline Eaton/T&A cover girdle at the same time, and would recommend a similar set-up for any Mach 1 owner who's going to frequent the track more than a couple of times per...
  16. Angus

    Mach 1 what are the best mods for a mach1?

    Sticky tires (Nitto or BFG Drag Radials) Gears (4.10 or 4.30's) Exhaust Cold air kit (K&N/MRT/PHP) in that order... :nice:
  17. Angus

    tried and true 12's

    4.30's are NOT too much gear for a 4V N/A Cobra. Drive one with 4.30's & you'll be considering 4.56's... :D
  18. Angus

    Mach 1 New Help Guys w/Mach 1

    Ben; Congrats on your new Mach 1! I hope you enjoy it as much as I do mine. Here's my stock '03 Mach 1 dyno & stock w/K&N Air Filter: Here is my car with the Bassani '03 Cobra Catted X-Pipe/Magnaflow Cat-Back/K&N Aircharger Intake system/4.30 gears - I still have the stock cast-iron...
  19. Angus

    Some Clarification: '03 Mach 1 vs '01 Cobra

    How 'bout this one: 310 rwhp Mach 1 Or this one: 300 rwhp Mach 1 :nice: I raced my '01 Cobra for a year with the IRS, Nitto Drag radials & 4.10 gears.... ...SOoooooo, I'll take that bet! :D You name the time, date & drag strip. :D Please post the dyno sheet when you...