Search results

  1. OutLawSE

    1994 Mustang Gt 331 Vortech SC'd

    Nice car Lee. Boosted stroker, very nice! Bump for ya ..... John
  2. OutLawSE

    GAS MPG ?? Acetone

    Guys, Does adding acetone to gas really help increase MPG. I drive 42 mile round trip to work each day and gas is killing me. Also, does it help lower emissions? Thanks
  3. OutLawSE

    Thinking of buying a 2001 GT, few ??

    How much HP is 10 psi of boost worth on the 4.6 PI?
  4. OutLawSE

    Cam suggestion

    I would suggest Trickflow Stage 1 with 1.6 RR for the most HP. Great cam, but the LSA is alittle low. Driveabiliy will suffer alittle. & you will have to purchase 1.6 rockers. OR Steeda #19 with 1.7 RR (Keep the rockers you have already). More computer friendly but will offer...
  5. OutLawSE

    Thinking of buying a 2001 GT, few ??

    I had 4.10s with my old Stang and they were a bit much on the highway. Might stay with the 3.27s for awhile.
  6. OutLawSE

    Thinking of buying a 2001 GT, few ??

    Well, I had 4.10s in my old stang and they were too much for the highway. The highest gear I would get would be 3.73s. Dunno, might stay with 3.27s. Thats not too bad of a gear. I am use to buying Mustangs and having to swap out 2.73s. Which was a must!
  7. OutLawSE

    Thinking of buying a 2001 GT, few ??

    The cars come stock with 3.27s correct ??
  8. OutLawSE

    Thinking of buying a 2001 GT, few ??

    Guys, I have been out of the Mustang world for a few years. I have owned 2 Mustangs in the past, both 94/95 with 5.0s. So the 4.6 is a new topic for me. I am thinking of looking for a 2001-2003 GT with an auto. (I need an auto for the wife) How does the 4.6 PI respond to basic...
  9. OutLawSE

    Buying a S-trim, what other accesories to get?

    I would take a look at the condition of your balancer while you have the crank pulley off. If its in bad shape, replace it with a SFI piece. It will have deal with the added stress of the blower and expand the life of the #1 cap crank bearings. That blower belt adds about 100lbs more...
  10. OutLawSE

    CAM Questions...??? why, and what

    You should consider the Trickflow Stage 1. Its better then the E303 and has a 112LSA. Allot friendlier then the E303 in an SN95.
  11. OutLawSE

    Saying Good Bye ...

    Guys, I just wanted to say thanks for all the help over the past 4 years. I would have never been able to build my 2 mustangs without the information I gained here. I know this isn't tech but I posted here cause I know most viewers, like myself, never read the Lougne area. They skip...
  12. OutLawSE

    vaccuum problems!?!?!

    My stock cam idles at 900rpm with 16lbs vac,
  13. OutLawSE

    Need some encouragement..

    Damn thats ashame. I thought the B&M pan did fix the leak. Leak free for 2 days. Then she started leaking again. Allot less though, only about 4 drops compared to a puddle. I think I am just gonna run her for awhile and enjoy it. Then tackle her in the winter.
  14. OutLawSE

    Need some encouragement..

    Thanks... If just the recent set-backs : The cam and trans leak have really made working on the Stang not too much fun lately.
  15. OutLawSE

    Need some encouragement..

    Guys, I need some encouragement to finish my stang. She is almost done and I just have a few issues left with the car: - A leaky AODE. New B&M pan, but still leaking a pint every 2 weeks. - Noisy driver side rocker. - And I think I need new rear shocks. She is riding rough and...
  16. OutLawSE

    Stock Cam Lift specs?? What will work well?

    If its a 5-Speed, I would use the Trickflow Stage 1 AODE = Stock cam with 1.7 rockers.
  17. OutLawSE

    wanting to get h/c/i

    You could always just go with heads/intake and 1.7 rockers. However, do you already have gears and a converter? If not, get them first.
  18. OutLawSE

    speedo not working after t5 swap

    Did you buy a complete swap kit ? If so, what added parts did you need to buy?
  19. OutLawSE

    speedo not working after t5 swap

    How hard was the T5 swap?
  20. OutLawSE

    Nitrous Leak

    Its the perfect time to replace the valve with a High flow valve from NOS. Thats what I did when I bought my Zex kit.
Top Bottom
Back
Forums
Menu