Search results

  1. 9

    1000 miles

    You would be really surprised to see what is suspended i your oil after 500-1000 miles, you should definetly change it. It only costs 20 bucks, after spending 25 g's you would think you'd have more sense. Yes there will be metal shavings and plenty of dirt. You ever heard that most of the...
  2. 9

    Front Rotor R/R

    You are actually just tapping in the seal. The hardest part will be getting the bearings greased without a grease tub. You can do it, just make sure you get plenty in there. Don't overtighten the spindle nut when you are putting the thing back together, it will wipe out your brand new bearings.
  3. 9

    Cobra rear brakes on Fox body

    What have you done with the brakcet attached to the brake hoses. I have the lines cut/flared and hooked up but would like to know what people do. Can I cut it off or do I have to attach it somewhere? Pics would be great.
  4. 9

    Would using a Powerdyne on a stock 302 w/ 124,000 miles

    Adjustable fuel pressure regulator
  5. 9

    Would using a Powerdyne on a stock 302 w/ 124,000 miles

    Upgraging your old and tired fuel pump would be a must-do. You can get a 255 pretty cheap, and they are pretty easy to put in. Also an afpr and a good tune, and you should be pretty safe as long as you are smart.
  6. 9

    440hp 331 Stroker for $7800??? Need advice!!!

    Check Out DSS racing. They make some killer Short/longblocks. And for thousands under the price you're talking about. Contrary to popular belief, A well built 331 can be 40 hp stronger @ 6000 rpm than a 347 with the same hardware. People don't think about frictional losses from the...
  7. 9

    ranger axle removal

    that doesn't screw up the rear brakes at all????????
  8. 9

    ranger axle removal

    I went and bought some craftsman 6 point wrenches and got those bolts out real easy. The axles all seemed to have some play in the horizontal direction <-----> shoud I let that worry me??? All of them were like that. thx
  9. 9

    ranger axle removal

    Made a trip to the JY today for some ranger axles...pinion pin lock bolts are giving me trouble......... What size is the stupid little lock bolt?? I thought it was 5/16, but all of my 5/16 wrenches strip the bolt heads. I used a cresent wrench and was successful in twisting the head off...
  10. 9

    NIGHTMARE! Need some guidance

    When I did mine they were a real bitch. After I got the nut off with an impact, I had to pound on the thread side of the bolts while my buddy spun the bolt with the impact. They came out real slow, but they all came out.
  11. 9

    Cobra rear brakes on Fox body

    I actually talked to him today, he is awesome and helped alot. thx
  12. 9

    Cobra rear brakes on Fox body

    Is this what you are talking about?? Thx btw
  13. 9

    Cobra rear brakes on Fox body

    So if I wanted to keep the ranger axles I would Have to use these brackets... Is there another bracket I need to attach the caliper to the axle??
  14. 9

    Cobra rear brakes on Fox body

    would this be what I need? REAR BRAKE BRACKET KIT [M-2300-M] From $189.00 http://www.seanhylandmotorsport.com/online/product_info.php?cPath=46&products_id=923&osCsid=6f60714ab4a135affc43bf119129de51 REAR BRAKE BRACKET KIT M-2300-M* Used to install Cobra rear calipers on...
  15. 9

    Cobra rear brakes on Fox body

    I need some help with sourcing some parts. (I did a search on the forum and couldn't find specifics) I would like to see some nice pictures of Cobra rears so I know what I am looking for. Here is what I think I need; -11.65" vented rotors -SN95 rear caliper w/ cobra pads...
  16. 9

    2003 cobra calipers on SN95 spindles?

    I actually got an pretty good price on a set of calipers, pads, mounting brackets and banjo bolts........just need to find some nice 13 inch rotors. Any body have some good wheel-off pictures of the swap?????
  17. 9

    2003 cobra calipers on SN95 spindles?

    Yeah I really want sn95 cobra rears so I can get the vented rear rotors, is there any part list out there for the cobra stuff? it is really hard to find in a yard around here.
  18. 9

    2003 cobra calipers on SN95 spindles?

    could you tell me all the parts you used on the front? I was going to use '03 cobra calipers, '03 banjo bolts, fox body ss lines, sn95 spindles/hubs, SVO mastercylinder w/ 2 port conversion, and I am still dreaming up by rear combo. What rotors should i use? Aftermarket stuff? Which...
  19. 9

    2003 cobra calipers on SN95 spindles?

    Will these work on SN95 spindles? Do I just have to get 13 inch rotors for these to work with the SN 95 stuff?
  20. 9

    Spintech Side Exhaust - Installed

    Nice House
Top Bottom
Back
Forums
Menu