Search results

  1. bock

    Engine Defective PIP sensor ?

    Well....I installe the WVE pip sensor and now i have to fire, no rpm signal to the megasquirt. So no start. i have try another working tfi module with no succes. Look like the new pip is defective... Is it possible that dirt on the pip can cause the jumpy tach needle ?
  2. bock

    Engine Defective PIP sensor ?

    i just order the pip from Rock auto. thks for the cleaning tips, i will give it a look, I wish it will fix my problem!:) From what i found on the web, i have to press out the cam gear and push out the shaft from the top.
  3. bock

    Engine Defective PIP sensor ?

    Wells is the same as WVE ?
  4. bock

    Engine Defective PIP sensor ?

    Same ?
  5. bock

    Engine Defective PIP sensor ?

    I just tried another tfi module with no luck. Any good aftermarket pip sensor on the market ? Oem are hard to find. Ecu is a megasquirt 2 so not possible to pull codes. Thks again !
  6. bock

    Engine Defective PIP sensor ?

    I have a problem with my 93 5.0 fox body. The car run great but have a little lost in power. I also notice that sometime, the tach needle makes small abrupt jumps (100 rpm or so) at idle and also on part thottle when cruising. The engine run smooth and good. Can this be a PIP sensor problem ? I...
  7. bock

    Upr Battery Relocation Help

    Hey all ! Little question, is the 135A circuit breaker on the positive side of the battery is big anought for the starter current draw ?
  8. bock

    Novi 1220 SL - fmu and fuel questions

    I run my 1220 with 30's and a 4:1 disc, i get a a/f ratio around 11.75 at wot... you should use a wideband for sure.... no place for lean conditons under boost!!!
  9. bock

    Difference between a 3550 and a TKO 500 ?

    What are the major differences between the two transmissions ? Thks !!
  10. bock

    MAF Sensor Question, Need Help!

    The c&l maf use the factory sensor. To calibrate it, the use different sample tube in it. check if yo have the good one. If you sensor is the 73mm, the tube shoulb be the one with a blue mark.
  11. bock

    73 and 80mm C&L maf sample tube...

    thks !!!! exactly what i need !!!:nice:
  12. bock

    73 and 80mm C&L maf sample tube...

    Can i use the red sample tube for #30 injectors in both 73 and 80mm maf ?
  13. bock

    PAXTON NOVI 1220 Pulley to Upper Radiator Hose Clearance!

    I've install the same kit on my 5.0 this winter with a 3 row rad with no issue... The rad hose as to be trim a bit more i think.
  14. bock

    Time to tune my Novi 1220 H/C/I set-up.

    TTT
  15. bock

    Time to tune my Novi 1220 H/C/I set-up.

    I have installed the new Novi 1220 SL on my TFS TW / F-303 / GT-40 Intake. Im gonna run this with # 30 injectors and the FMU. (Dont tell me to get the 42's and a tune !! Its gonna stay like this for now.) 70mm TB, 80mm Maf, 255 LPH high pressure fuel pump with a kirban fpr. I need help...
  16. bock

    F cam and trick flow heads?

    No prob here with the F and daily driven...
  17. bock

    F cam and trick flow heads?

    Im running a F with TW and a gt-40 intake. clearance is correct, used the clay method, had over .100 on both valves... with stock 93 shortblock.
  18. bock

    YS-trim ??

    ttt
  19. bock

    YS-trim ??

    Thank you for the replies !! Now, what can we say about the Paxton novi 1220?
  20. bock

    supercharger without ac...

    Im looking to install a vortech or paxton 5-7 psi (Maybe 8-10 :D ) kit on my non-ac equiped 93 lx. It seem like there is a few thing to watch when the car dont have the AC option?? They dont directly bolt-on? something with the pullies ??
Top Bottom
Back
Forums
Menu