Search results

  1. R

    help!! found L bracket underneath my car

    Looks like a bracket they use at auto body shop for straightening frames.
  2. R

    C4???

    Sounds like you have a transbrake valve body. If so you need to engage the transbrake to allow it to go into reverse. This is the way my pro tree brake is.
  3. R

    Line Lock as a Security device

    It would burn the linelock up fast. It takes power to activate the solenoid.
  4. R

    Bad Luck

    I have boiled over a few times on different vehicles including my 88gt. So far never hurt a thing. I would be a little worried if you have aluminum heads. But if it is running good now I would say it's fine.
  5. R

    changing w/p got 2 problems

    Time for a new timing cover. I think I have seen them at 50resto for around $120. I suppose you could get that one fixed but it would be much easier to replace it. as for the stud just get a long bolt and use washers to space the AC bracket off the water pump.
  6. R

    PLEASE HELP: c4 related question!

    Holcomb motorsports makes a mount to place a hurst quarterstick in the stock mounting position. If you have one of the popular mustang mags laying around look at their ad or call them up.
  7. R

    Car Won't Start (with video)

    I had a TFI module cause me fits one time. I was new to the stang and it would run for a few minutes then die. I got the module tested and it showed fine. However when it would get hot it would not start or run. I spent a fortune for new coil, plugs, wires, distributor pickup, and even a new...
  8. R

    Car Won't Start (with video)

    What I would do is get a can of starting fluid and spray a little into the throttlebody. Then try to start it. If it starts or sputters then is in not getting any fuel. If it just cranks without trying to start chances are it is the TFI module on the distributor.
  9. R

    T5 to c4 ?

    I switched from a T5 to C4 and I picked up. My local track is only 330ft so I went from a 5.34 to 5.20 and picked up 1 mph. That was leaving on a 1.8 60ft. Should see 5.0 by the time Learn how to leave on the auto. One bad thing is if the car is a street driven car then it will be miserable...
  10. R

    T5 to C4 swap

    My car is track only so I have a 4000 stall. I have a reverse manual valvebody so I dont need a kick down I shift the car manually. The car is fuel injected. I went with the redneck c4 package.
  11. R

    T5 to C4 swap

    just completed the switch myself. You need a case fill C4. A 157 tooth bell and flex plate and block spacer plate. Shifter I used a hurst quarter stick it came with everything i needed. Need to move the cross member forward as far as it will go by grinding the spot welds off the end tubes and...
  12. R

    Professional Products harmonic balancer

    put the car in 5th gear should do it.
  13. R

    H-pipe brand, does it matter?

    My brother put a summit brand on his car. It was like $110. fit nice with the summit brand headers.
  14. R

    Trick flow top end kit problems???

    Make sure you don't have the MAP sensor on the firewall connected to the intake. Mine would idle rough but after a couple days the computer settled down a lot. If you only have a stock throttle body that will hurt a lot. I am running 16 degrees btdc for best performance. Start the car in the...
  15. R

    Trick flow top end kit problems???

    Mine was night and day. However if you have the stock gear that is killing the low end. When I first installed the kit I still had the stock gear. It was a dog in the low range, but at the top of the gears it was strong. After 4:10 gears the car screams. It pulls hard from 3500 to 6500 RPM. Mine...
  16. R

    Trick flow top end kit problems???

    Is you car speed density? I had to convert my 88 to mass air to get it to run after installing the kit. the stage 1 cam and SD don't work together.
  17. R

    anyone with this setup?

    I am running stock pulleys with the ford ac delete. You don't need that smog delete pulley. Just run the belt with out using the smog pulley. On my 88 car with no smog pulley and power steering moved up to where the ac is I used a 72.5 K6 belt. The belt was so tight to get on it took a couple...
  18. R

    Heater hose fitting thread size?

    I'm pretty sure it's 3/4 inch NPT. the same as a fuel injection intake.
  19. R

    wasnt too satisfied with the first drive.

    This car is a 88 Speed density car no mass air. the timing is only set to 10btdc. A bump in timing will make all the difference prob worth 10-15 rwhp with extra 5-6 degrees.
  20. R

    check engine light only in a certain left turn

    sounds like the ignition switch is loose and about to come apart. this is a common problem and a 12 dollar fix if that is your problem.
Top Bottom
Back
Forums
Menu