Search results

My problem started when I drove home (the car was running perfect no problems whats so ever) turned off the car went in took a shower and went to go to work and it would not start it just clicked. I have not touched anything sense the car would not start except to replace the battery, starter...

I did not have any problems with the car before this started with the starting problem and now this issue. My starting problems were with the ground from the battery to the ground to the block. I just added another ground wire between the battery and the block and replaced the battery posts...

The saga continues starting problem solved now runs like crapola Thanks to all who have helped me with my starting problem. :SNSign: And special thanks to HISSIN50. :nice: The problem was one of the ground wires. I replaced all the battery posts and the neg cables and it started kind of...

Before my car first had it's starting problem it was running perfect and I had no problems. All I did was drive home turn the car off and 1 hour later went to leave and nothing. Would not start! Replaced the starter, starter relay and all the cables and it starts but runs like crap. What...

The car has sat for almost 2 months with the starting problem and the battery has been disconnected so many times did the computer lose its memory? It will start but runs like crap and will not stay running without almost full throttle, smokes and misses. I have tried to run my code scanner but...

Thanks to all who have helped me with my starting problem. And special thanks to HISSIN50. The problem was one of the ground wires. I replaced all the battery posts and the neg cables and it started kind of:mad:. Now the car will not run. It starts but it's like it's flooding out and you have to...

Thanks for the help. I tested the clutch safety switch for resistance and also bypassed it and it is working fine but still will not start...Just clicks. I ran another battery cable to the block and grounded it to check and make sure i have a good ground. Still will not start just clicks. I...

Already been through this:shrug:. Can't get hot if it will not start. This is what I have done so far. 1) Made sure battery was fully charged and had it checked. 2) Battery connection: cleaned both posts and connections and replaced cables with new. 3) Cleaned Starter connections. 4) Replaced...

Thanks again your helping me. I'll check the wires red/blue and white/pink for the resistance. If I bypass the switch and the car starts then I'll know that it's the switch and I can just replace it ($37.50). Yes please tell me how to bypass all that crap just so I can start the car. If it...

So I am confused:shrug: I thought the clutch safety switch was on the clutch pedal? In that photo are you talking about the white square relay looking thing is that what i test for 12V? My car is a GT not IIRC are they different? Can you please explain how I check the switch. And once I check...

Thanks for the help. I could use that picture of a pedal box you said you had so I know I'm checking the right switch. Still just clicks when I turn the key. I think I checked the wrong clutch safety switch.

Thanks for the reply. Checked all the ground wires and cleaned them really good. Also checked voltage at the started like you said and it had 12 volts. Still nothing. I also pulled the plug (bottom black one) on the CSS and put my meter on that and got .06 volts.

Thanks for the reply. I went through all the reply's and double checked everything and I am now working on your process. I had to buy a Multi-Meter and have to learn how to use it. First a dummy question what is the CSS? The clicking is not a dry-fire noise sound. It is a loud click...

Thanks for the reply. All the connections have been cleaned and the starter is new (not rebuilt) Clutch relay was checked and is good. Also use my truck and jumper cables to try and start it.

Thanks for the reply. The check engine light does not come on. Ignition module, distributer and the main coil are new.

The battery is good had it checked and its only 1 year old diehard. Connections have all be checked and all have been cleaned. The voltage gauge does not dip at all.

I have a starting problem. The car started fine then drove home 2.3 miles and when I went to leave! Nothing, nadda, Zilch It just clicked. This is what I have done so far. 1) Made sure battery was fully charged. 2) Battery connection: cleaned both posts and connections. 3) Cleaned Starter...

Thanks HISSIN50 It was under 1.0 so I did replace the MAF. Now my car runs great:nice: All those little quirks with the idle, running lean, serging and pinnging are gone. I have an open track day coming and I woun't worry about it cutting out at 140 MPH.:hail2:

Yep!:nice:

I have been having problems with my car cutting out or miss firing. I ran a code reader and it gave me a pip fault so I replaced the dizzy with a reman. unit from NAPA. It worked for a day then it would not start, just cranked and cranked not spark at the coil. I had the coil and modual checked...