Search results

  1. starkie

    How to Bleed the Brakes on a 96gt

    You have the order down right. But before you bleed them at the wheels, bleed the master cylinder. You don't have to take the master cylinder off, you wil see the bleeder screws on the side of the unit. Bleed that first, then the wheels from the rear passenger on up to the drivers side front...
  2. starkie

    Just got car back from Tim!!! 14 rwhp 24 rwtq!!!!!

    Could you post the rest of the mods you have? I am curious, that is all. Thanks man. Starkie
  3. starkie

    EFI Solutions or Custom Chip?

    So can anybody from EFI say anything about this? I don't want to rush to judgement before Tim at EFI gets his say. Starkie
  4. starkie

    Line Lock tech - I Dont understand!

    The roll control comes with a momentary switch, so you have to hold the switch down for the line loc to work, and just let the button go to release it. I wired mine into the fog light switch, since I took the foglights out. So mine comes on when you push the button, and you have to push the...
  5. starkie

    Line Lock tech - I Dont understand!

    See if this helps. Starkie
  6. starkie

    Line Lock tech - I Dont understand!

    My motor is out of the car, so I will take pics of the installed line loc so you guys can see it. I do have an 01. Starkie
  7. starkie

    Line Lock tech - I Dont understand!

    No they both lock up. The Hurst instructions suck. And they also tell you that you can't use it with the Bosch ABS unit, which you have. I have the Hurst unit, and it works great. Joe Lynch over on the Corral has a great how to article page that gives you every step you need to do. Go over...
  8. starkie

    Purchasing cams and need Good Mechanic in the DC/VA/MD area...

    He's a good choice if you wanted a good price. And very knowledgeable. Good call, Justin. Starkie
  9. starkie

    Need help

    Did you try EBAY? They always have those rims on there. Starkie
  10. starkie

    Left vs. Right side height (wheel well gap) of GTs

    I think they all sit like that. I hated that about my car. If you relocate the battery to the right side of the trunk, it will help a ton. Thats putting 30 something pounds back over the right side, and taking it off the left front side. Starkie
  11. starkie

    Need ideas on dimpling header while on car

    I think that would work. One other thing you might try is drive it to a local muffler shop. My buddy's 95 GT had a problem with his long tubes and the TKO he installed. The header was hitting the bellhousing. They charged him 35 bucks and clearanced the header for him. Took like 25...
  12. starkie

    C&L plenum or densecharger

    That cracked me up! Good choice though! Starkie
  13. starkie

    CAMS

    VT Stage 1 or 2 cams. Starkie
  14. starkie

    Engine Swap...

    You can use your C&L meter still. And the timing cover from the 96 should be transfered over to the new engine, you are right about the interference. You don't need a writeup man, you got everything covered. What are you waiting for....lol Good luck man! Starkie
  15. starkie

    Anyone making over 300hp/300tq at the wheels with the stock shortblock?

    AutomaticWeapon is doing it without ported heads. KenB's car has been there for awhile. There are others too, check out the members pages at www.modulardepot.com Seems to me its becoming the norm now. A year ago there were very few people in that category. Starkie
  16. starkie

    SCT chip review in here

    Good for you man. I like seeing posts like this, can't wait to get my SCT tune. Starkie
  17. starkie

    SCT vs. EFI Solutions?

    www.modularmustangs.net for EFI solutions info www.modulardepot.com for SCT info I like the tech support for the SCT software, so thats what I am going with. Starkie
  18. starkie

    T/A sensor touching the gear, how bad is this?

    Give Steeda a call. The sensor should not be touching the wheel at all. I had to call Steeda because mine when I had it was also touching when I installed it. They will tell you how to make sure it is ok with a feeler gauge, which you can buy from any tool store or Pep Boys for a few bucks...
  19. starkie

    P-51 tq. and h.p.

    Well said. Thanks for the info. Waiting for them to come out. Starkie
  20. starkie

    Long Tubes a waste on N/A cars.

    Maybe somebody should learn how to read a dyno graph before they go bashing LT headers..... And the 2 tenths of a second and 1 mph in the 1/4 mile improvement I got was all in my head. Long tubes headers are just plain awesome. Starkie
Top Bottom
Back
Forums
Menu