Search results

  1. Bizz

    No Fuel Pressure Please Help

    Note this is on a 1991 Mustang lx 5.0.. It is stock.
  2. Bizz

    No Fuel Pressure Please Help

    Clue – listen for the fuel pump to prime when you first turn the ignition switch on. It should run for 5-20 seconds and shut off. To trick the fuel pump into running, find the EEC test connector and jump the connector in the Upper RH corner to ground. The EEC connector is near the wiper motor...
  3. Bizz

    No Fuel Pressure Please Help

    So the other day I go to try to start my mustang (been sitting for a few months) Cranks but did not start. So here is the list of "stuff" I have done to troubleshoot. Listen for fuel pump prime. No audiable humm. Turn key to ACC position 5 or 6 times and try to start. No start, Turn...
  4. Bizz

    First post in forever

    Yah the ped kind of balances out the crap mpg I get with my stangs:rlaugh: .. It is kind of fun too:D
  5. Bizz

    First post in forever

    Just wanted yall to know some of us old heads are still here:flag: . I just have been real inactive and have not posted in a few years:rlaugh: . I took the ol 91 out today to work though.. and I still love the sound of the ol girl.. Wazzup yall.. Hopefully Tomoss and JR are still...
  6. Bizz

    93' Cobra R only 195 miles

    Must have been sitting for a longg time...
  7. Bizz

    TDC with upper Intake removed..

    That is correct. Distributor has not been touched yet.. I am going with the line up with the #1 method...
  8. Bizz

    TDC with upper Intake removed..

    great.. thanks
  9. Bizz

    TDC with upper Intake removed..

    Sorry for the typo, collant has not been drained yet...
  10. Bizz

    TDC with upper Intake removed..

    do you think it would be better to hook everything back up loosely.. ie battery, maf, injectors, upper, tb exc and crank the ignition with the key? The lower is still fully in, just the connectors undone and electricals.. I have not yet pulled the distributor or ropped the coolant. What would...
  11. Bizz

    TDC with upper Intake removed..

    I am swapping the upper/lower on my 91. I have all the connectors removed, upper and tb removed and injectors/fuel lines unplugged. I forgot set TDC before I started taking everything off.. So I never did the "finger in the hole" blow trick to set the car at tdc.. So my question is... Can...
  12. Bizz

    Help With Starter...

    Oh yah, for the starter, 2 go to the high torque mini, you need to cut the lobes off the old "power wire" Enlarge the hole to go onto the mini. Then you need to run the red 10 ga from the spade connector to the starter selonoid. Then you swap sides with the old power caboe and put the 10...
  13. Bizz

    Help With Starter...

    Yah, you can replace them with regular ol hardware from the store. Get grade 8..with 2 grade 8 washers and 2 grade 8 split washers. They are 1.5 in with a standard coarse thread pitch... I dont have the exact measurements but when I pass the stroe next tiem I will pipe back in...
  14. Bizz

    Help car wont start when hot

    Ehhh, Both of my 91's had the same problem New Starter fixed both. (on one I replaced tons of stuff, neg wire, selonoid, starter, roter, dist cap, and the module, while all of these things helped, in the end it was the starter for the heatsoak and the module for cut out and Fuel pump after...
  15. Bizz

    Should I Trade Or Walk Away!

    !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
  16. Bizz

    Ever warped a bolt's thread with a hammer? Help me

    I did this today on my 94 sentra axle... Sort of expensive to replace.. 200 ish. So I took it out, put it in a bench vise, got out my makita 4 1/2 in angle grinder and grinded down 3 full threads (This took almost an hour, the axle is probabally 5 times the guage of your issue), Then keep...
  17. Bizz

    Why are Fox Bodies called Fox Bodies?

    yah a little reasearch turned up this simply a name for the platform, nothing signifing meaning though, http://www.mustangmonthly.com/thehistoryof/62978/
  18. Bizz

    Why are Fox Bodies called Fox Bodies?

    I think it was the guys last name that "invented" the platform. Bravo Mr Fox...
  19. Bizz

    help identifying t-5 with no tag

    Just out of curiosity if the ebay member was madstangparts you just got burned. He sold me a 4 cyl trans within the last month, but his account was taken away due to too many negative feedbacks. He may be selling under a different name, I hope this "seller" isnt the same guy. (He shipped out...
  20. Bizz

    T-5 4 cyl?

    yah, thats kind of how I felt too. If I cant have my apple pie, why accept a lemon sort of... This sucks totally. Well if I do put it in at least it will make my 2.73's feel like 3.73's :D . This is fn bs. I ahte when people screw each other over. Especially when it comes to Mustangs. I...
Top Bottom
Back
Forums
Menu