Search results

  1. STANGateURlilSS

    Intake information

    Stick with the gt40/cobra/exploder manifolds. if you plan to stay with the stock straw port heads. if you are going to be getting a set of heads, then get a manifold that will match the heads. also remember there are ALOT of good bargain heads out on the market nowadays.
  2. STANGateURlilSS

    electric waterpump?

    i have had many different cars with eleltric water pumps.. and they work great.. for street cars, race cars, circle track cars.. all cars.. and yes there are afew that let you retain your stock belt setup.. ie has a idler pulley.. that just spins..
  3. STANGateURlilSS

    347 make more hp than a 351?

    .030" doesn't make that much difference.. what makes the difference is the rod ratio, piston height..
  4. STANGateURlilSS

    need 2nd opinion

    yes that will work with the stock heads
  5. STANGateURlilSS

    TKO 600 first or TRICK flow top end first?

    do the tko600 first.. i mean think bout it.. whats the use of doing the h/c/i swap.. then drive the car.. and wham.. good bye t5.. then what.. your stuck with a good running engine and a dead t5
  6. STANGateURlilSS

    engine build recommendations

    if your plan on making 400rwhp n/a you better build something bigger then a lil 306ci unless u plan on running boost.. in which case thats no problem.. but 400rwhp n/a out of a 306ci.. alot of compression and a big cam.. and bigger heads then those edelbrocks..
  7. STANGateURlilSS

    How many millimeters in 3.5"

    for future reference... 1 inch = 25.4 milimeters..
  8. STANGateURlilSS

    Where to find Lazer Red paint?

    dealer is another place
  9. STANGateURlilSS

    car show..

    there is a car show.. at the ford building in irvine.. every sat.. from 7:00am to 9:00am ish..wanted to inform u guys and let u know..
  10. STANGateURlilSS

    How do you tell a GTS...

    hahahaha
  11. STANGateURlilSS

    what do you guys think about griggs racing control arms?

    have not had those control arms.. but i do have 6000wc.. in my eyes.. griggs racing makes THE VERY BEST OF SUSPENSION COMPONETS.. end of story.. and if u call then for tech advice.. they are extremely helpful.. they even helped me out when i didn't have there products on the car.. "basic bolt on...
  12. STANGateURlilSS

    I made 5.0 magazine!!!!

    congrats
  13. STANGateURlilSS

    26spline G-Force T-5 ? and Cam suggestions for N20..

    www.specclutch.com and yes u can order it online direct from spec..
  14. STANGateURlilSS

    429, good or bad idea??

    :nice: :nice: :nice: :nice: :nice: :nice: :SNSign:
  15. STANGateURlilSS

    429, good or bad idea??

    #2-Your comparing a BB chevy "car" motor to a BB Ford "Truck" motor!! The truth of the matter is Ford never put anything in one of its street production cars that could match the power of a 427 chevy!! :lol: :lol: :lol: :lol: :lol: :nonono: :nonono: wwwwwhhhhhhhaaaaaatttt.. ford never...
  16. STANGateURlilSS

    1.7 rockers

    what cam? what lift? what duration? what heads.. etc.. u need to throw out some more info..
  17. STANGateURlilSS

    G force trannys. Whos got um and what do you think

    the g-force t5 i have.. shifts.. like a t5.. although mine as straight cut gears.. a little on the noisey side"gear whine" and 26spline input.. what i got to say made the most difference was the shifter.. had a b&m ripper.. felt nice.. much better then stock "hell anything is better then the...
  18. STANGateURlilSS

    70 or 75 mm throttlebody?

    well it all depends on what engine.. and how built it is.. i mean if your running a stock 5.0l.. its useless to run 75mm tb.. but if it is a 306 with alum heads, cam, intake.. and a blower then yeah i can see putting a 75mm on it.. but you also got to realize what manifold your running.. if it...
  19. STANGateURlilSS

    429, good or bad idea??

    i do not experiance with putting one in a fox.. woudl make for a great car.. i mean unless u want to go autocrossing or road racing.. the swap is pretty straight forward.. i have had alot of experiance putting bbf into early mustangs.. 67-70 mustangs.. a friend and i just finished putting in...
  20. STANGateURlilSS

    Pro-Comp Heads???

    those heads will match up too a trick flow street heat or trick flow r series manifold.. built an engine with those heads on a 331 with a trick flow street heat manifold.. that car has since gotten a 347 with those heads and a parker funnel feb and a carb.. those heads flow quite well.. and yes...
Top Bottom
Back
Forums
Menu