Search results

  1. 5.0CRAZY

    Where to get FRPP control arms

    Hey, been looking desperately for some FRPP front control arms. P/N M-3075-A. I know there discontinued but Im hoping there is still a supplier somewhere with a pair. If anyone knows of any available I would appreciate your help! Thanks
  2. 5.0CRAZY

    Chrome....Black chrome...or black?

    Ya I've been looking on their site a little too shopping around. I was hopeing to be able to get 18x8's on the front but it seems most companies will only sell 18x9's. Will that casue any fitment/ rubbing issues on the front? with 245/40 tires? The black chromes look nice I havent seen that...
  3. 5.0CRAZY

    Chrome....Black chrome...or black?

    Thanks... Ya it's my favourite color by far as far as coupes go... It's amazing how different it can look depending on the lighting. That's 3 for chrome which I was leaning towards as it the safer bet. Anyone recommend the best/ cheapest site to order from?
  4. 5.0CRAZY

    Chrome....Black chrome...or black?

    Im gonna but some 18" saleens replicas for my 91 emerald green coupe once I switch to 5 lug. Just wondering what your opinions on what would look best? Has anyone here bought the basic 5-lug conversion from late model resto? ($399.99 one)? I dont have any good shots of it but Ill try and upload...
  5. 5.0CRAZY

    DCC controller issues.

    Well, I tested the the pins for the probe and they measure 4.84V. The probe measured 104.6Kohm. Seems close enough. Anyways I guess I scared it because it seems to have started working now. At least at idle, just have to give it a test drive now. Whats a good underhood source for the ign...
  6. 5.0CRAZY

    DCC controller issues.

    The car ran at about 180* and occasionally would creep up to 195 with the mech fan setup. I've never seen it hit 200* before so I think the t-stat is fully open much earlier than 210* I have the u/d jumper on and the fan still doesnt run at all. I could see the t-stat causing issues but I dont...
  7. 5.0CRAZY

    DCC controller issues.

    Installed the DCcontroller from dcconrtol.com today with the taurus electirc fan. Wired it up all correctly following the directions. But the fan doesnt seem to come on as the temp climbs, I let it get to just under 210 before shutting it off without the fan doing anything. Did some...
  8. 5.0CRAZY

    Rear bumper removal/installation?

    TTT I might have to replace my cover as well on an LX coupe though, as mine has seems to have a bend under the passenger side tail light.
  9. 5.0CRAZY

    Strange brake bleed problem...

    Yeah thats what I figured, just making sure there wasn't anything I was missing before I rip off the rigid lines because the fittings are so chewed up Im going to have to vice grip them off. And try and scrounge up some new ones some how.
  10. 5.0CRAZY

    Strange brake bleed problem...

    I swapped rear ends in my 91 coupe, still stock drum brakes. Had to transfer the rigid brake line from my original rear end to the one installed now. Im trying to bleed the brakes now and for some reason there seems to be absolutely no brake fluid comming out of the bleed screws. I can have...
  11. 5.0CRAZY

    Alternatives to dccontrol e fan controller

    I have a taurus fan I was going to install soon as well. How much is the DC controller that baskin sells and does it come with the wiring needed as well? All I have is the fan itself so far.
  12. 5.0CRAZY

    Water temp sending unit...

    Good advice, thanks.
  13. 5.0CRAZY

    Water temp sending unit...

    Also, was the mechanical oil pressure gauge supposed to come with some kind of a sender unit as well? It just came with the nylon line and fittings on either end. During my search I saw people mentioning a mechanical oil Px sender?
  14. 5.0CRAZY

    Water temp sending unit...

    Ok, so the resistance of the wire could be 0.5ohms or 20ohms and it won't throw off the temp reading?
  15. 5.0CRAZY

    Water temp sending unit...

    Did a search but couldn't find info specific enough for my question. Just bought a autometer mech oil pressure, and electric water temp guage. The water temp guage didn't come with a sender (got it used) and I only have about 6inches of the wire which is supposed to run to the sender. My...
  16. 5.0CRAZY

    3G just installed....

    So it seems that the remanufactured 3g alts arent up to par and are marginally better at best than the 2G alts. Thats info I wish I had before doing this swap as it would have saved me a lot of time/money and headache. Don't buy a refurbrished 3g is the moral of the story:bs:
  17. 5.0CRAZY

    3G just installed....

    I have u/d's but not on the alt. The pulley that came on the 3g alt looks to be the exact same size as the one that came stock on the 2g. I haven't measured the size but it definitely doesn't look like a 3" pulley. Seems weird that the alt would be no better than a 2g.... just my luck though
  18. 5.0CRAZY

    3G just installed....

    So is this just a weak alt or could it be the regulator? I just checked my idle and its more like 800-850rpm so that should be more than enough to get the alt putting out decent power
  19. 5.0CRAZY

    3G just installed....

    Id say it idles around 700-800rpm. I did install it with 4 gauge cable, but I still have to add the 4 guage ground strap and add a fuse off the power cable. (The fuse I bought was too high amperage-200amp). Pulley configuration is underdrives but left the stock alt pulley on. I doubt its the...
  20. 5.0CRAZY

    3G just installed....

    I just bolted in a 3g alt and didn't notice much change over the 2G. At idle the headlights still dim very slightly with every increase in the heater blower fan speed. It measured about 12.5v at idle with headlights on/full heat/rear def on. Anything above 1000rpm brings it well above 14v...