Search results

all sold

NEW MM MM Bumpsteer Kit MMTR-1 $130 NEW MM Steering Shaft MMST-11 $215 Tweecer RT $250 (used, works great. RT Model) Set of fox quarter windows in pretty good shape $30 both Edge Racing AOD Torque Converter 2400 Stall $120 OBO The prices are below what they would be new from MM. You...

sold

......i suspect my dad dropped my crane box while it was in the garage waiting to be installed by the scratches on the box. The light comes on and it blinks when u crank it but the car wont fire. Has anyone sent one to get fixed and how much did it cost? Where did u call? and finally how...

I have mine installed straight up dot to dot. It pulls HARD once it reaches around 3k rpm. Before that its decent but really comes on at 3k. I've heard that Buddy Rawls recomends it be degreed to the 108* centerline. Would it be worth it to go back in and degree it? If anyone's done it, how...

Whelp, i had originally put my gauges in the center vents with a plate i made. YOu can see in this pic where i had my gauges before, i wanted my center vents back so i decided to do something. Moved the a/c controls down, radio up Hellhole of wires Relocated the hellhole of...

Just thought i'd pass this along for anyone having problems with sticking or dragging brakes, or anyone thinking of doing the upgrade. Just my .02 cents on the problem :cool:

ok, i did the whole 5 lug rear disk conversion and am using a 96 V6 booster. Everyone that has done the swap knows that the rod that connects to the brake pedal isnt angled down like the stock fox one. My problem is that this angle is causing my brakes to stick and drag. Sometimes i'll be...

My old brake booster was leaking ( you could hear it hiss when you held the brake pedal). So i replaced it with another used unit and everything is fine, no hiss and no hard brake pedal at cold startup. But now the calipers stick if i do a hard sudden brake. Is there an adjustment to help this...

My brake booster is crappin out on me. Everytime i step on the brakes all i hear is this hisssssss sound and the brakes get HARD every once in a while. Would i have any ill effects from upgrading to a 94/95 Booster right now? (Stock brakes all around)

My GT's front sits higher than the rear with stock springs. In the rear it has a 3 finger gap and in the front a 4 finger gap. Basically i've done h/c/i and a/c delete, removed foglight bracket. I didnt noticed the front was higher till after the new engine went in. Is this common? Also, if...

If you own a 5.0 mustang long enough your TFI module will fail sooner or later and leave you stranded on the side of the road. So here are a few things to make your life easier. Carry a spare TFI module in your glovebox or toolbox (get one from a junkyard or get a new one if u can swing the...

Rebuilt my engine to 306 w/ Trickflow TW heads, TFS1 cam and Typhoon intake. REALLY liked the power but it didnt plant you in your seat until 3k rpm. Mind you, this is in an aod car. Came upon a Performer intake cheap and slapped it on to see if i could get a lil more low end grunt. Well, it...

Well my stock brake booster took a crap on me. Should i just upgrade to a sn95 booster? or get a stock replacement. I will eventually upgrade brakes but not for a while, still hoarding parts. How will that affect my brakes in teh meanwhile? :shrug: thx for the help

A friend will let me have his prochamber from his 95, but i am not sure whether it will fit on my 88. The prochamber is for shorties. Thx :spot:

The only brand of cats that i've heard of being good are Carsound and CatCo, are these good brands? Also, what is a cheap place to get them? So far the cheapest i've found are this store on ebay that carries them...

http://www.babesandstuff.com/media/PornWars.wmv

Ok, so i'm installing it with the DC controller. The controller has power and ground (2 wires) and the fan has power and ground as well but a blue wire also (3 wires). What is the blue wire for and what do you do with it?

Well i know the stock rev limiter works by cutting fuel. Is this hazardous and can it create a dangerous lean condition? I know cutting spark the way an aftermarket ignition system is best, but is the stock eec way of doin it a ticking bomb? The reason i ask is because i can get my hands on a...

Well i put my new motor in about a month ago and was sorta dissapointed in it. ( Here are the details http://home.earthlink.net/~nito_jdr/id25.html). I had it at 10 degrees and it felt just like my stock motor. Left it at that the first week to be conservative. Got curious and put it at 15 and...