Search results

  1. 67coupestang

    Stumped on this brake issue

    Heres the setup. 67 coupe, Front discs from a 73, Master cylinder from a late 90's Explorer, Willwood 4 piston rear disc Just did the rear discs and afterwards it felt like maybe I hadn't bleed it thoroughly enough (was using a vacuum bleeder), But then I noticed it looked like one of the...
  2. 67coupestang

    Cpp mini sub install

    I never found much on the install for the Classic Performance Products mini sub frame with tubular a-arms so I'm going to try to document this as I go,, Bear with me its my first build progress write up, and I'm not much for stopping to take pictures. But here I go. So some back story first...
  3. 67coupestang

    Ignition Doa

    last weekend while cruising home my coupe died about 1 mile from home, just died, coasted to the side of the road. i finally get some quiet time to look it and i dont have any voltage at the coil.. i should mention that a few years back i put a mallory cd ignition, coil, dist etc. i have...
  4. 67coupestang

    89 Intermittent power loss pleases help

    ok its actually in my ranger but i seem to have the ranger station stumped... so heres the skinny ive had this ranger for about a year. got it cheap cause it didnt run, no biggie all it needed was a fuel pump, did that, cleaned out the tank, new filter, FPR etc. okay so fuel delivery...
  5. 67coupestang

    stumbly 351w please help

    i searched and didnt come up with much, maybe i dont know how to phrase it. my 67 has a MAJOR stumble when the thottle is bipped hard off idle. i'm pretty sure its a vacuum leak but i cant find it. Its been on going for a while. ive replaced the carb base gaskets and the intake gaskets at...
  6. 67coupestang

    top loader in south central Minnesota

    I have a toploader out of my fastback i dont think i'll need. Its from a 67 and the tag reads rug-E1. the gears look in great shape, just the one syncro looks a little worn 1-2 maybe? shifter is there but one of the tabs for the reverse lockout is broken off. I also have the bellhousing. she...
  7. 67coupestang

    dynacorn question, not debate :)

    Man there is a lot of threads about is it real, is it worth it etc... my question is simple. I was looking at a picture of one and it looked like it used the convertible seat platform. not the two seperate platforms like my 67 has. so the question is most obviously this is done for...
  8. 67coupestang

    69 block worth anything??

    Before i get too into ripping this thing apart is she worth saving or should i send her in for scrap? its been sitting dry (no oil) for sometime now and i was pulling little rust mud balls out of the crankcase, the oil pan looks like it froze out as well as some plugs. There is no ridge on the...
  9. 67coupestang

    too many vins?

    WEll I finally found my 67 fastback. and im in to that excited, but exploring all the work it needs stage. I noticed on the front clip there is 3 locations where the vin is stamped? I dont remember this on my coupe. theres the one we all see then 2 more, one on each side, under the fender...
  10. 67coupestang

    OT: need advice on welders

    I'm planning a little chassis work for this winter. I was wondering what would be an acceptable welder for frame work. I'm not looking for anything too fancy ($$$) and i dont plan on doing it at all fast so i dont need a high duty cycle. I have to wire the garage regardless so input volt is...
  11. 67coupestang

    jeep/dodge intake

    has anyone ever tried using one of these? I just wonder if the opening for the Dodge throttle body is the same as the standard 4bbl. Just seems like it would be a nice way to build a cold air into the fender plus gain a little clearance under the hood.
  12. 67coupestang

    85ish upohlstery question.

    I have a pair of 85 gt seats that im trying to take the cloth off to remove the headrest and have them recovered, but i cant get them to slip off for the life of me. does anyone know where i could get directions or a write up? and also where can i get new cloth? TIA!!!
  13. 67coupestang

    windshield polishing

    My windshield has a nasty haze to it from schatches making it really difficult to see out of at night. Anybody have any experience polishing theirs?? I was thinking of trying some simple polishing compound and a rag, I dont have a power buffer. Anybody know if this is a service that an auto...
  14. 67coupestang

    need help suspension steering problem!!

    sorry its a little winded... Ever since I slapped the disc brakes and 16's on my car there has been a problem with the way it steers. Let me try to explain what happens. Its only at higher speeds, handles straight as an arrow and doesnt pull what-so-ever. But if enter a corner at...
  15. 67coupestang

    whats wrong with a MII suspension??

    What are the negatives of installing a Mustang 2 type front suspension. How easily can it be modified? i.e. dropping the upper arm for more camber control?
  16. 67coupestang

    Carb woes

    The other day i thought i'd get the stang out and tool around, but the whole time driving it it smelled like it was leaking gas... All i could smell was raw gas. The top of the 4 barrels was wet, so i was thinking something like my float was stuck and the bowl was overflowing? The car was...
  17. 67coupestang

    Serpentine and newer radiators.

    Well heres what got this started... My 67 has a cronic over heating problem. But looking at prices aluminum radiators, high flow pumps etc are all more expensive for the 67's then the fox bodies. Plus the fox bodies use a 27 or 30 wide radiator (bigger is better). WEll I have the front dress...
  18. 67coupestang

    Mustang club of central iowa

    Anybody going to the show on the 6th?? I'm going to try to bring down my 67, not to enter mind you just to park across the street so others can see it when they get there :p
  19. 67coupestang

    stuck valves!!

    any one have any helpful tips for freeing stuck valves in the car, heads on?? we tapped with a hammer and soaked with WD. they are starting to come a little loose but still are wide open...
  20. 67coupestang

    Ot: YO MTV pimp my MOWER!!!

    gay :rolleyes: http://cgi.ebay.com/ws/eBayISAPI.dll?viewItem&category=66761&item=2396237933&rd=1