Search results

  1. jivepepper

    Parasitic Draw On Battery When Parked.

    I took the amps out years ago
  2. jivepepper

    Parasitic Draw On Battery When Parked.

    Well I think I might have choice but to use the 250 Ma. I have literally have went to every parts and hardware store in my area. The local radio shack has closed down and the nearest one 70 miles away. It's 25% larger in amp rating but at the same time and only 50 more Ma..
  3. jivepepper

    Parasitic Draw On Battery When Parked.

    Well I went and tried to measure the amp draw and wasn't getting a reading. The multi meter has 2 fuses one is a 200 Ma/250 volt and the is 10A/250V. The 200 Ma is blown and I'm having trouble. Finding one. The closest I can find is 250 Ma/250V .
  4. jivepepper

    Parasitic Draw On Battery When Parked.

    Yes, but it doesn't have the back amp rack and speakers installed and I never run the radio.
  5. jivepepper

    Parasitic Draw On Battery When Parked.

    I have a 3 month old battery, and when I went to start my car yesterday, the battery was completely dead. It would barely flash the anti theft light. It was only a few nights ago, since I drove it. It ran fine, had bright lights, and the voltage gauge was reading normal. I charged the battery...
  6. jivepepper

    4.6 Mods

    Unfortunately there's not a lot of power to be had with basic bolt ons with these engines. I've seen people spend 2K over time on bolts and pick maybe 25-30hp. If they did little research they could have had a used SC set-up and picked over a 100..
  7. jivepepper

    Sean Hyland 4.6 Engines

    Sean was the man 15 years ago. I've been running a MMR MOD 900 SB for over 11 years.
  8. jivepepper

    Engine Shavings In Oil?

    Since you're mentioning the dip stick is scraping on the dip stick tube may be that's where it's coming from, but to be honest I doubt it. I'm just hoping for your sake that's all it is. Like already mention above drain your oil and cut open the oil filter and inspect both. You could also run a...
  9. jivepepper

    Pcv Valve Question

    Well if the drivers is still hooked up to the induction pipe going to intake pipe that goes to throttle body and utilizing the pcv it will probably be relieving enough crank case gases and pressure. If you want just run a new hose, usually the pvc is on the passenger side.
  10. jivepepper

    Pcv Valve Question

    Is the drivers side also plugged? If so you either need to install the stock pcv setup or install a vented catch can to the valve covers to releave crank case pressure Do you have oil leaks?
  11. jivepepper

    T-3650 Swap In A 2000 Gt

    It's a direct swap just by a clutch for your 2000 if you're using the stock flywheel.
  12. jivepepper

    Transmission Compatibility 04 Gt

    T45 99-01 tr3650 02-04 these are the 5 speed manuals both by made by tremec all interchangeable.
  13. jivepepper

    2003 Gt Just Purchased Vortech Kit

    36lb will get by you by at 6-8 psi but barely. I would go with 42lb. You do not have to remove the pan. you need a tuner, maf without iat and wire it separate and a fuel pump followed by a good dyno tune. Vortech has install ins online.
  14. jivepepper

    Looking for old pic

    I do have TFS with the oval TB option and a Accufab single blade TB that flows 1694 cfm lol. Just wanted to show some one else.
  15. jivepepper

    Looking for old pic

    Thanks, I'll do a search over there. I did one here of course, thinking it originated here.
  16. jivepepper

    Looking for old pic

    No its been so long ago.
  17. jivepepper

    Tork Tech 2v

    Nice numbers congrats.
  18. jivepepper

    Looking for old pic

    Along time ago a member on her bought a Typhoon intake. Soon after he installed it it developed a leak right in the seam of the crossover. He had a pic of it squirting out and I would like to find it.
  19. jivepepper

    Stoked.....RR Intake just came in .. Pics

    RR makes a great racing intake. Why go with a round TB over the oval TB plenum? I would have went with the dual Cobra style TB opening. Then get the single blade oval TB for the 98 Cobra that flows 1750 CFM from Accufab. I went with a TFS intake but the oval upper and the Accufab TB and I...
  20. jivepepper

    500rwhp how-to write-up w/ sq-trim

    Sounds like you have a huge traction prob just like me lol. That's why you pick up 30 mph on the big end easy shift from 3rd to fourth very little boost lost. I can't speed shift. Watch the hitting a wall feeling. It can as be simple as spark blow out, rev limiter or more dangerous and you're...
Top Bottom
Back
Forums
Menu