Search results

Hey guys. My oil pressure sensor is leaking. When I did my engine swap, I noticed that my pressure sensor was different then a fox setup, and also impossible to tighten, as its not a normal wrench or socket shape. Heres what a fox setup looks like: Notice how there is a piece that comes...

I have another question for you all. I'm pretty much finished with the power plant (I may port the lower this winter), but I need ALOT of other things. I just ordered a set of 13" cobra brakes so I can actually stop from 140 haha. My next purchase is going to be subframe connectors, and I've...

Hey guys. My car isn't cooling like it should on the highway, and I checked posts and found out about the air deflector that sits right under the rad support. I dont have one currently on my car, and I guess that might be the problem? I found them on 50resto.com but it appears like they dont...

Hey guys, I never had keyless since ive owned my car, but it does have the box for it. I looked up remotes on ebay and searched by "GQ43VT4T" which I believe is the fcc number I need. Two different ones come up though, and thats where I got confused. I found remotes with and without a trunk...

If i recall, you need a cage starting at 13.49? I haven't taken my car to the track yet, and have no idea what it will run. Its a 5speed, has stock gears as of now, about 360-370 rwhp and stock weight. I've played with a few STI's and evos which I know run around that time and I keep up pretty...

Anyone have an idea of how much time in the 1/4 you gain by going from 2.73 to 3.55 or 3.73's? I tried searching as i thought i read it before but couldnt find the post? Im especially interested in the case of my car as I have about 370ish rwhp and stock gears. At 90 im around 2500 rpms which is...

Hey guys, im finally getting some gears in my car. I think im going with 3.55's instead of 3.73's but have not decided yet. The rear is stock as of now, and has 108k miles on it. Should I get it all rebuilt while im getting gears? I never have a problem with it not spinning posi, and there are...

Hey guys. I don't know a whole lot about tuning. I know some of the basics, bu tnot in this case. My car is currently tuned (custom burnt chip) for 6psi. If I up the boost a bit, should be tune be ok still? I have plenty of fuel (255lb in tank and t-rex inline) and injector to handle the power...

Hey guys, I'm posting this one for a friend. His car is an 87 converted to mass air. It has been through alot (had 200k on first stock engine), and recently got a new engine, a stock long block. Now the problems. When the key is turned to on, the fuel pump runs like it is supposed to, but never...

Hey guys, I have an 88 olds cutlass ciera for a beater. It was ok, until it decided to not have heat anymore. It blows the fuse (25amp) as soon as one is put in, and the key is turned to "on". Here a link to the wiring diagram: http://www.autozone.com/images/cds/gif/large/0900823d800f4040.gif...

Hey guys, my car is having some wierd electrical problems. The voltage, water temp, and oil pressure gauges will all jump around a little bit, and when I hit the brake I can notice the gauges moving up a bit (except for the volt meter which moves down a bit). Another wierd thing is that I...

Hey guys, my car is still up at the dyno and the only thing holding it back now is that its running out of fuel around 4k rpms. My dyno tuner suggested getting a t-rex and that if I can (which I know I can) install it myself to save money, then have him double check the tune once I get it on...

Hey guys I recently took my car up to a shop, second street speed, to get tuned and have a chip burnt. He is having a problem with my maf where it is giving him too much voltage at idle, and it pegging at 4k rpms. I have a c&l 73mm maf with the sample tube for 36lb injectors. Do you think it...

Hey guys. Its been awhile! My car is finally at a shop, second street speed in perkasie (www.secondstreetspeed.com) to get dyno tuned! He ran into a problem tho in which my maf is getting pegged at 4k rpm's and that its not working very well. He was saying something about it should be around .8...

Hey guys, im finally getting my car back together and ran into a problem today while trying to put the upper on. The new motor came with polished FRPP valve covers, but the upper hits it. I dont know if i can use a spacer because of the supercharger. Does anyone know if stock GT valve covers...

Summit lists two possible part numbers for the timing cover gasket. Which should I use? They also offer a kit with waterpump gaskets too, but I have a new waterpump with gaskets, so i would like to avoid them. Ive found part numbers: MRG-792G FPP-2331 The FPP-2331 says it fits...

I was planning on getting my car tuned by PSI motorsports. I know the guys there and they are REALLY good with mustangs, and I completely trust them with my car. My question about the chip is this. I know when they tune, they use the dyno, Does this mean my car will only be tuned for WOT and not...

Your box is full!

In order to afford living on my own, I have to sell the mustang once it gets completed (motor still being swapped in). How much is the car worth? it has: gt40x heads B cam crane rockers 94.95 cobra intake bbk 70mm tb c&l 73mm maf 36lb injectors Powerdyne 9# blower with bypass valve...

Hey guys, while ripping my car apart for the new engine, i noticed that only the one O2 sensor is plugged in (drivers side) and the other isnt there at all. The hole in the h pipe is plugged. Is this ok? or did the previous owner screw up?