Search results

  1. D

    2001 Temp hot

    i replaced the thermo, the old one was in the open position when I took it out. I drove for about 20 mile. It would stay below the center point on the gauage creep up a little past then go back down. when I pulled into my garage it was slightly past the middle point on the guage. The outside...
  2. D

    2001 Temp hot

    I was hoping that the flush would take out any gunk, and air that might be in the cooling sytem. I went to the dealer yesterday and got a factory thermo and o-ring. If I am lucky that will fix it. From all that I have read your help on this is right on.
  3. D

    2001 Temp hot

    Yes it does, The fan was running fine when. I started the car and let it run for awile in my garage with the air on
  4. D

    2001 Temp hot

    This is a new cooling problem, it had run cool and strong for years. the car only has 15500 miles on it. The radiator has been in for 10,000 miles. Other the pulleys and 180 thermo. the cooling is stock.
  5. D

    2001 Temp hot

    I live in Florida so that should tell you something. I have a 2001 GT with a fluidyne Radiator and I also have underdive pulleys. I have a 180 degree thermo. I just had the radiator flushed and filled with Amsoil Radiator fluid. I still have a overheating problem. It reads about a 1/4...
  6. D

    CDC Shaker and Mach 1 Hood

    That is good information It looks worth it, I have had the Shaker for 2 years I guess, Maybe I can get $400 for the whole thing in Orlando on ebay. Hood and CDC kit. It seems that if you built some custom Brackets you could move the shaker back and higher to fit the new hood. And also the air...
  7. D

    CDC Shaker and Mach 1 Hood

    Has anyone figured out how to get these 2 parts TO WORK and anything extra that might me needed. Thanks as always
  8. D

    Loose steering help

    My steering feels loose and doesn't seem to engage. It will rotate 1-2 inches before it engages. It has lots of free play? any thoughts
  9. D

    System Too Lean Bank 2

    I code reader is telling me this now. 2001 GT 7500 miles, shoety headers, Mil elim, high flow cats. I was getting a cat effecency reading now this reading. Thanks for all your help to my postings
  10. D

    Mil Elims HELP

    I was getting a reading of Cat effency from my code reader. I have shorty headers and High flow cats. I was getting this reading about once a week, then it progressed to every other day. So I got tired of deleting the code with the reader, and installed Mil elims this weekend. Well the service...
  11. D

    Loose steering need Suspention Shop In Orlando and advice

    I have a loose steering Problem that I want to have looked at. Do you know of a good shop in Orlando. I have Borgensen steering shaft, MM K member, & A ARMS, Tie rods, and Bumpsteer, CC plates, coilovers. off-set rack bushings . My wheel has play over an inch of play > left to right and right to...
  12. D

    Update loose steering

    Thanks for getting back to me so you took it to the dealer? and they didn't know what to do? If you figure it out let me knw, I will do the same
  13. D

    Update loose steering

    I have isolated the loosenes, Now what? The problem seems to be where it attached to the Rack and pinion. I moved the steering shaft it feels solid from the steering all the way down to the rack and pinon attaching bolt. It is not loose at the attaching point. Let me try and describe it...
Top Bottom
Back
Forums
Menu