Search results

  1. W

    New personal best in 1/8th

    Well, after getting rid of the Holley Systemax cam (the original one cut by Lunati) I replaced it with a ford Racing "F" cam and couldn't be happier. Runs a whole lot better and I have some bottom end back. So, with that said: 6-6-07 Sunshine Speedway, air was so thick you could cut it with a...
  2. W

    Upper is off once again,,,,,,,Systemax help

    I've done the two spacer thing. (1) 1" and (1) 1/4" (to clear valve covers) I've done the stock valve covers/no spacer thing (not much difference) I've now got the stock valve covers/1" spacer thing going on. John, I know you say a little oil is fine, but tell me Im not sucking to...
  3. W

    Help, MSD-Tach issue,,

    We installed a tach tonight in my car. Hooked it directly to the MSD box. Zero's out when you turn the key and suprisingly it's pretty spot on w/the tach in the dash. HOWEVER, I had an issue tonight and wanted to bounce it off a couple of ya. Little history first. Tach supposedly came out of...
  4. W

    Help,,opinions, ideas??

    Well, here are two pics of my sparkplugs. The clean one is from the drivers side and the dark one is from the pass side. Didn't need to do all eight since these two represent what each side looks like. Funny how the drivers side look good and the O2 sensor that is in the exhaust is the one that...
  5. W

    Oh boy,,only a couple days away from running

    Spent yesterday hooking up this and that. Waiting on new H pipe. There is oil and water in the car. Put the upper/lower and TB on yesterday. Just have to finish up a little bit of wiring on the inside. Hoping to not have any major issues and be back on the road Monday!!!!
  6. W

    Powermaster Alternator kit,,,w/pics

    It was either this or the set up from March. Whatcha' think?
  7. W

    Progress report,,w/PICS!!!

    Ok, motor and tranny are in the car. Had to buy another 3/8" spacer and then cut it down to a 1/4" (double stack. put it above my one inch spacer) so that the upper intake could be put on and clear the valve covers. Upper is on just for mock-up at this point. Won't be long now guys.
  8. W

    Welcome back to me,,,LOTS OF PICS

    Been a couple years since I've been here but Im back. Been through a few stangs in that time as well. I think when I joined I had the white95, sold it for a Harley (stupid mistake.) When I got tired of the harley I replaced w/another Laser Red 95, got rid of that for an 03 Cobra w/a dyno proven...