Search results

I'm about to head to the dyno I have an 00 GT with a built shortblock, stock top end. How high can the stock topend rev safely? thanks!!

I put a stroked 302 8.75-1CR shortblock in my 00GT. It has a p1sc with 10# pulley on it. I made 393rwhp/402rwtq on this combo with the stock shortblock. What is your rwhp/tq guess for this with the stroker on it and a boost pipe upping the boost to 13#? I was hoping for 440/440? (stock top end)

My fuel gauge has always fluttered around 28-32psi while crusing and ideling when I get on it, it will jump up and stay steady but when I let off and push in the clutch it dips real low (below 20psi) for a split second? I had a procharged 00 gt with walbro 255 in tank, 42# injectors and a 40 amp...

I am going to get my dyno tune tomorrow for my 00 GT with procharger p1sc. I had a new short block put in and it has been sitting in the garage for several weeks waithing for a nice day to take it to the tuner. yesterday I let it run for 10 min and when I turned it off it sound like a rushing...

Has anyone gone from a stock shortblock to a stroked 302 sb with a blower and dyno'd it to see what the stroker alone did? I'm going to a stroker next week with a p1sc 10#. With no other changes what do you think my numbers will change to? right now I have 397rwhp and 403rwtq.

does anyone know where to set the shift stops on a steeda triax for a t45 tranny?

Who makes the t45 transmission? Is it tremec? I was just under my car for the first time and saw the tranny was a tremec but my car is an 00gt is there a way to identify which one it is exactly? It would be sweet if the previous owner put in a good tranny and didnt tell me!

I thought I spun a bearing in my motor or perhaps broke a wrist pin (knocking sound from the back of the motor) BUT I hooked up an oil pressure gauge and it is holding steady 80psi oil pressure. Is my problem something else?I was told that if it was those things my gauge would be fluttering and...

Tonight was the first time out in my car the track wasnt great. I was spinning way too much but here is my best slip, with this mph what would you guess the car could do if I could drive it... rt .030 60' 2.237 330 5.731 1/8 8.523 mph 89.07 1000 10.886 1/4 12.891 mph 113.71

I just took my amp and subs out of my 94 gt and put them into my 00 gt now it pops and squeels when I turn the radio on. I have the mach 460 in both cars. The wiring was already ran in the oo by the pevious owner but it is a show car so I'm sure everything was ran right. Any ideas?

What should a procharged 10psi 00 GT with 390rwhp stock gears run on street tires in the 1/4?

How much hp is the stock trans good for in a 2000 gt? Is it at t-45? I thought I heard they were good for 300 rwhp? is it true? thanks

i have a 94 gt and today the it deceided that all of the air settings = floor and defroster. If I turn it to AC or MAX AC its cold but it doesnt blow through the vents only the defroster ad floor. Any ideas what i need to do to fix this?

i have a 94 gt and today the it deceided that all of the air settings = floor and defroster. If I turn it to AC or MAX AC its cold but it doesnt blow through the vents only the defroster ad floor. Any ideas what i need to do to fix this?

My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks

My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks

My top is starting to tear has anyone had luck fixing this problem before it turns into a big hole? I have a 3 inch rip that is not completly torn apart yet , How can I fix this? Thanks

I have a 94 with with bypass smog and an underdrive pulley on the crank. I have had it like that for 20K miles. Just recently My belt has been slipping off the tensior pulley and getting wedged there and shredding. It has done it several times now. What is the deal? Would pulleys just...

I conisdering buying a 99 or 00 GT what mods will I need to do to it to get it to run 13.5's without a power adder and on street tires. Also I will be doing lots of highway driving so the gears I would want would be 3.73 or even a 3.55. What are your thoughts?

Could someone post the thread link for building a homemade CAI. I can't find it anywhere... Thanks