Search results

Ya its a street/strip car still. Im definitly going with rear coil overs and i have found a buddy through a buddy that has the scales so i will be setting it up and trying it again!!

Yes i have been looking into setup my instant center line but i had the car at the shop today and found my anti roll bar bent! Damn Comp! Hehe oh well. So who makes a good anti roll bar?? Im running lakewood drag kit that drops the lowers and then steeda adjustable uppers. pinion angle...

What are you using for rear suspension and what are your 60 ft times??? There are sooo many parts for mustangs and soo many mustang owners and everyone has their own opinion. But what is a good rear suspension for hooking on launch? I do realize a four link and a back half is the best but i...

I was wondering what the serious mustang drag racers are running for rear coil springs. I run mid to low tens with 1.4 to 1.5 60 foots and have been running the stock coil springs from my 89 lx but they have sagged too much from all the abuse i have given them and age so i was wondering what is...

Thanks guys Ya i do drive this car on the street alot so a spool is not really an option. Yes i am running an eaton posi unit for about 3 years now and im very happy with it. Im running drag springs up front with 90/10I talked to a chassis guy yesterday and showed him some videos of my car...

OK thanks, ya i have been doing alot of internet surfing about mustang suspensions. Im learning about instant center and center of gravity. I had the lakewood bars years ago, i might have to look into them again. Thanks Dan

What are you high HP guy using for rear suspension at the track?? Im running the stock style suspension with tubular controls, stock v8 coils, anti roll bar. I am making alot of HP and it is a stick car. But i seem to be spinning the left rear tire all the time. Im wondering what...

Oh wow, thanks. Ill take a look for that article

No, no intercooler but i do run the snow performance meth kit to keep the temps down. But thanks for the info/idea.

Im curious if anyone has dyno tested edelbrocks intakes for max HP or if anyone knows the flow numbers on them? The reason im asking is i recently rebuild my 331 motor which last year my 635ft and 734hp to the wheels. This year i changed to a bigger cam and traded my T-trim head unit for a...

you really only have problems with stock axles when someone uses slicks and the engine doesnt produce enough power to spin the tires and the car does a dead hook something in the driveline has to give. So if your only going to ever use street tires then you shouldnt have a problem. I ran stock...

I fired up the car this weekend to take her for a spin when i noticed a lifter tick. So i goosed the throttle to see if it changed and it made a horrible rattleing noise. So i tore down the top end to find that the "H" shaped retainer that holds the roller lifters straight is broken and my...

I realize that this is going to be different for every engine built but im just getting into the force fed scene so im just trying to learn without building up too much cylinder pressure and popping the engine....... My signature has all the parts i have in my combo but i run 8.35:1...

Thanks guys! This is perfect, it doesnt look too bad to do at all. Of course my motor is out of the car too!:D

i will be installing my mcloed bell housing in the next couple day but there are no instructions and i was wondering if i could get some tips on how to install it!:D I heard you need some offset dowel pins so i have bought the .007 pins as well as the .015 pins. So if anyone has installed...

I installed the G-Force transmission 3 years ago and in that time have put approx 30,000 miles on her daily driving it and also 100's of passes down the drag strip launching at 6000rpm and power shifting everytime and i have no problems as of yet. I dont have the dog style G-Force but it still...

Im looking at pushing the horsepower envolope on a stock block but i was wondering if anyone knew if Ford made different strength 5.0L roller blocks and what cars were they in or what are the casting numbers? Thanks Dan

Im going to look into it some more. I have driven my buddies cobras and i like the pedal pressure and engagment. Plus if i go with the DFX i will only need to buy the disc. But i still would like to drive a car with a spec clutch. Thanks guys!

I have always used centerforce clutches in my car and they have been ok but i have never been real happy with them. And now with my new setup for next year i would like to find a clutch that can handle the power! It looks like my new setup will be in the 650hp range and im curious what you...

Yes i thought the cable too, so i did replace it and its still the same....