Search results

  1. Mr_Q

    Engine Turn Ac On, Rpms Drop 400 And Car Stalls. Solved!

    Thank you for the link in that write up. I have resolved the issue and I will list how here. (it's brief) 1. TPS was way out of adjustment. (thanks BBK!) <<moan 2. Vac-lines were crappy. Replaced with all new HQ silicone. 3. BBK strikes again. Their MASS-AIR is crap. No matter what we did it...
  2. Mr_Q

    Engine Turn Ac On, Rpms Drop 400 And Car Stalls. Solved!

    Codes: O2 sensor TPS voltage low (hmmm) Have not done an idle reset.
  3. Mr_Q

    Engine Turn Ac On, Rpms Drop 400 And Car Stalls. Solved!

    Again, heh, the clutch IS engaging. When the AC turns on I am getting way too much load on the motor. 400-450rpm drop which eventually leads to a stall quickly. That's the situation I am trouble-shooting. No funky noises.
  4. Mr_Q

    Engine Turn Ac On, Rpms Drop 400 And Car Stalls. Solved!

    3G Alt, 120amp. Yes the AC clutch kicks when I turn AC on, even at idle. (it should) I will check wiring and the WOT relay. Plan on checking all grounds too. I know the AC doesn't pull that much current. The 400rpm dip when it's on almost makes me think the pump itself is not turning as freely...
  5. Mr_Q

    Engine Turn Ac On, Rpms Drop 400 And Car Stalls. Solved!

    It blows cold if you keep your foot on the gas to keep RPMs up, but otherwise with AC on the rpms drop to around 400 and of course the volt gauge plummets. I tested with no AC on, but blower on full and do not have this problem. Even the electric fan I have that kicks on doesn't cause this...
  6. Mr_Q

    Engine Using Coolant Yet No Smoke, Steam Or Leaks?????

    I am completely stumped. I have a new 3-core aluminum radiator. A Flex-a-Lite fan, new performance thermostat housing, new stat, good water pump, all new hoses and my car is using coolant.; a lot. It's not over heating but it but it obviously gets a lot warmer once the LOW COOLANT light trips...
  7. Mr_Q

    Upholstery Upgrades using Stock Fox Frames!!

    Finally yanked my driver's seat. We straightened it and welded all the seams. Took about an hour for the welding. Got the tears in my original cover fixed at a local upholstery shop. I tell you, the frame doesn't budge AT ALL now! No flexing and perfectly straight. I also had the upholstery shop...
  8. Mr_Q

    Is there no upgraded convertible top out there?

    I'm really tired of the poorly mounted stock style rear glass. It's designed to fail after 2-years I swear. They just lay the glass on a thin strip of plastic with glue on ONE side? THAT'S IT?? UGH. I want to find a top where the rear window has a gasket around it, sealed nicely, and even...
  9. Mr_Q

    Upholstery Upgrades using Stock Fox Frames!!

    Yeah those look great and I don't even have an issue with the price. But this all depends on one key component. THE FRAMES. Which for most of us are in terrible shape. Come on TMI! Make some frames or better yet FULL SEATS. I see MUCH value in that.
  10. Imported Item

    Imported Item

    My 7-up. She was rough, but a great beach ride.
  11. Imported Item

    Imported Item

    My 7-up. She was rough, but a great beach ride.
  12. Imported Item

    Imported Item

    My 7-up. She was rough, but a great beach ride.
  13. Imported Item

    Imported Item

    My 7-up. She was rough, but a great beach ride.
  14. Imported Item

    Imported Item

    Lot of fun in this one. Complete suspension, great track car.
  15. Imported Item

    Imported Item

    Lot of fun in this one. Complete suspension, great track car.
  16. Imported Item

    Imported Item

    Lot of fun in this one. Complete suspension, great track car.
  17. Imported Item

    Imported Item

    Lot of fun in this one. Complete suspension, great track car.
  18. Imported Item

    Imported Item

    My Shelby, loved this one. Sad to see her go.
  19. Imported Item

    Imported Item

    My Shelby, loved this one. Sad to see her go.
  20. Imported Item

    Imported Item

    My Shelby, loved this one. Sad to see her go.