Search results

  1. Z

    Rich smell

    I had a problem where my FPR vacuum was unhooked but resolved that. I may have other issues like the lines on the vacuum canister seemed like they are not the best of shape. The reason I didn't replace them is because they the smell seems to come from the fuel rail area hence me thinking the...
  2. Z

    Rich smell

    I'm all of a sudden getting a strong fuel smell. When you coding your base tune do you ever get a strong fuel smell in the cabin? Not sure if my tune is really rich or I have some sort of fuel leak. basically...is it the tune or mechanical failure.
  3. Z

    Raw fuel smell

    Vacuum I may have messed up my vacuum connections. I have a black hose coming off of the FPR that is going into the EGR. I'm guessing this goes to the intake bend. There are are green and a red. in that bend now. My guess is the green goes to the egr?
  4. Z

    Raw fuel smell

    I'm getting a really strong fuel smell inside my car. When I open the hood I smell it to. It's really strong in the cabin of the car. I looked under the hood to see I saw any standing fuel but didn't see anything. The car isn't missing or anything. What might be the most likely culprit and where...
  5. Z

    Stereo is Shutting off

    I'm having a weird problem where my stereo will turn on for a minute but I can't change the volume and then all displays on the unit disappear. I can tell it has power. This is a Pioneer Premier with 2 displays and it will close when the key is off. It will just stay open. At the same time my...
  6. Z

    Sputtering and missing badly at start

    Yep, forgot the coil and filters.... It's a K&N and seemed alright but should have a cleaning. I Kinda wanted to get an ebay or homemade CAI cause I hate the stock airbox. Probably needs fuel so that is a must. Ignition Coil? Is the OEM Coil sufficient for a HCI set or it there performance...
  7. Z

    Sputtering and missing badly at start

    I tried turning the engine with my flex bar and I saw the distributor move. I tightened down the hold down bolt and she started right up. She is bucking badly. I'm not sure if the problem is the timing is now off or I have the tune set on the wrong selection (TwEECer). I did a compression test...
  8. Z

    Sputtering and missing badly at start

    Hi All, Just got my stang woke up from her winter sleep. I drove her to work and then I got a check engine light. When I tried to leave she sorta started, sputtered and died. I don't really hear the normal exhaust tone like it's either missing really bad or no spark at all. I pulled...
  9. Z

    Car won't start with SPOUT plugged in..bad computer???

    I'm having a problem like this. Right before I had this problem MY car though a code. I pulled it. 116 which means the ECT of out of range. ECT adjusts timing based on coolant temp. This may be your problem.
  10. Z

    Missing Distributor Bolt???

    Do you guys know what thread and size this bolt is so I can pick one up at the hardware store? Otherwise it's a jegs/resto purchase..the Effing shipping costs more then the part..LOL Maybe I'll just by some more stuff she needs. I do have a lifter/valve noise coming from my engine that should...
  11. Z

    Car back together and check engine light

    Yep Dumbo left it unpugged...LOL It's plugged in and she runs better. Now I'm getting a check engine light on right about the time when she gets to operating temp. what's the procedure for the engine on code test? I have a OBD1 code reader without the manual...LOL This kinda seems like I...
  12. Z

    Car back together and check engine light

    Ima tard... Wrong code...I thought I memorized it but my mind does not possess the force..LOL Anyway, it's code 122 which is: Throttle Position Sensor circuit Low Input. What causes this...dirty sensor? It was sitting out for a while so it could get dirty.. Thanks guys, Tom
  13. Z

    Car back together and check engine light

    Thanks for the reply guys...Much appreciated! I take it that the IAC is this thing: Intake Air Temperature sensor 94 mustang | Flickr - Photo Sharing! Looks pretty dusty may be the problem... I'll keep ya updated.
  14. Z

    Car back together and check engine light

    My stang threw a code of 112 on the key on engine off test.. I looked it up on this site and the description was: Intake Air Temperature circuit Low Input. Is this a MASS air flow sensor dirty maybe?? Thanks, Tom
  15. Z

    Car sitting

    My car has been sitting for over a year and I've just replaced the intake gaskets. When I tried to start it, she only turned over a second... then pauses and then turns over another second. I've hoping part of a low charge on a battery so I'm charging all nite... Do I need to try adding some...
  16. Z

    Coolant in oil problem

    Thanks for your input kurt!
  17. Z

    Coolant in oil problem

    Hey all, I've got the manafold off the car and took a few pics. If it's a intake leak should it be obvious now?? Here are a few pics. Intake Pics
  18. Z

    Coolant in oil problem

    So, Is is possible for a leaky lower intake gasket to suck coolant into the engine? Pardon my ignorace and thanks for your reply. Thanks in advance.
  19. Z

    Coolant in oil problem

    Last summer my car started smoking out of the exhaust and I figured it was the head gasket. I finally started tearing her down and found oil on my upper intake spacer and gaskets....is this normal??? also found some residue on the center port on my upper intake. Do you know what this center...
  20. Z

    best repair manual

    sorry to say it but I lost my chilton repair manual. Since I have to get another one I'd might as well upgrade. what is the best repair manual? Helms? Factory? Since I'm not the most experienced with car mechanics, I need a good one. Thanks, Tom