Search results

  1. S

    Speedo Stopped Working and Car Stalls?

    Where is the "speedo" fuse? I looked at the fuses under my dash. :shrug:
  2. S

    My Speedo has stopped working

    I have changed out the VSS, checked all the fuses, re-set the computer, and it still doesn't work, I also changed out my speed-cal with a new one. WTF? Any one have these issues? It stopped working before I installed the T-500 tranny. :bang:
  3. S

    05 GT vs MACH1 race RESULTS.....thats right...RESULTS!

    Dude! The Mach 1 has 3.38 first gear, so if the GT is 3.23, it is obvious who will be quicker off the line! If you mean an auto trans, I don't know what the first gear is in this one.
  4. S

    05 GT vs MACH1 race RESULTS.....thats right...RESULTS!

    I was getting on highway 133 in Irvine Ca. and low and behold, a lime green 05 gt with Saleen marks ! I pulled right next to him and gave a thumbs up. He looked at me and pointed straight ahead. We were at 65 mph and we both punched it. I immediately pulled one. two , and three car lengths up to...
  5. S

    Tri-Ax

    I puchased a TKO 500 tranny and it comes stock with a Hurst shifter and internal stops. This is a great stock shifter, and there is no adjustments to be made. No one makes an aftermarket shifter for this beast. No need to. The "stock" is rock solid with a positive short shifter. ;)
  6. S

    Help with mods for 97 Cobra

    I have 4.30's in my Mach, my RPMs at 70 mph are at 2500. I had 4.30's in my 98 Cobra and the fun factor was way up. Don't fear the gear!
  7. S

    Help with mods for 97 Cobra

    Gears, 4.30's or 4.56's if you are serious about drag racing!!!You will be saying Oh my God!! :nice:
  8. S

    Mach 1 Mach Exhaust Improvements

    I gained 15 hp and 28lbs of torque with just a non-catted BBK X-pipe. Major seat of the pants change! Sounds exotic too. I only made 5rwhp and 7rwtq with just a Magnaflow cat back. If you change your X-pipe, go with the non catted since you won't need to smog it for four years. Just swap in the...
  9. S

    Mach 1 Any idea where to get a used 2003 mach 1 in Orange County...???

    Chino Hills Ford, Fritt's Ford in Riverside should have one, but call them first, they are going fast!
  10. S

    Mach 1 Change in late 03 and 04 Mach 1 heads ?

    Nope! They are the same heads. I have an 03 and it has dynoed at 295rwhp and 308 torque SAE! :nice: