Search results

  1. donsbad68

    19 or 24# injectors for gt40 build

    I'd run the 24lb units.
  2. donsbad68

    Will stock motor benifit 1.7 rollers?

    1.7's will usually hurt an otherwise stock 5.0 (HP wise) due to the valve float RPM being lessened. Stock 5.0 springs and heads are the weak link and don't really flow that well.
  3. donsbad68

    Lets talk Superchargers... for the STREET! Facts and opinions!? Chime in

    NX Plate kit. FTMFWB's!
  4. donsbad68

    Pulling Codes

    Re-read it a couple times it will make sense, its an easy process.
  5. donsbad68

    D/S loop ?'s

    I run it off the lower bars of my cage on my Merc and it works fine.
  6. donsbad68

    87 88 thunderbird rear in a mustang

    Good write up. The swap is worth it if you do it right and use the brakes properly.
  7. donsbad68

    window motor: high tq vs low tq?!?!

    I'd just run the low torque. It would take me about 2 hours to put one in the right way.
  8. donsbad68

    could a bad FR cause a rich condition with a 190lph fuel pump?

    Find out what the PSI is set at and get back at us. Also dump the codes just cause there isnt a light doesnt mean there isnt codes.
  9. donsbad68

    Can I put a 275/40 17 on a 17X8 rim?

    On an 8" they will bulge, on a 9" they look pretty good. On a 10.5" they start to invert and not look great again.
  10. donsbad68

    felpro gasket question

    Never heard of that and I think I'm assembling my 100th motor. Dustin
  11. donsbad68

    Is this right?

    It will be fine but, it would be better on a F/I car then a N/A car. Dustin
  12. donsbad68

    Will 24lbs be enough? And bench my setup of parts coming in!

    yes
  13. donsbad68

    Is a S-Trim too loud for a DD???

    Define too loud in Db's
  14. donsbad68

    QA1 junk

    qa1 k-member :scratch: Mine fit perfect?
  15. donsbad68

    Oil change time interval?

    Some components of the oil will break down from sitting long periods, but I think you should be fine.
  16. donsbad68

    headrest removal?

    ^ Easy as pie
  17. donsbad68

    Self-installing Cams

    $1500? I'd get a new installer
  18. donsbad68

    '00-'01 rear end work in 03?

    Direct bolt-ins
  19. donsbad68

    Big exhaust dilema!

    Call SLP or Daryl Bassani and see what he can do. He's great to work with.
  20. donsbad68

    04 GT - What should I do next?

    130 rwhp from a blower on his car? You must be factoring that on a large amount of boost. More then I would run on a DD.
Top Bottom
Back
Forums
Menu