Search results

  1. D

    dyno tuner chicago area

    http://www.1320hp.com/ try this place.
  2. D

    for you mustang Gods...

    TMOSS,that "sounds" like a nice street motor. WHAT DID IT RUN IN THE 1/4? HOW DID IT PULL COMING OUT OF A CORNER IN 3RD? numbers are that numbers,they don't prove nothing. here's an example: i have also had a stock longblock with a performer upper/65mm t-body. race pullies 3.73 5spd...
  3. D

    bbk long tube/mac h-pipe

    they are differant widths. bbk wanted people to use only their products. i found this out after i had triied to install my old prochamber onto the bbk longtubes. which sucked cause now i have their bbk x-pipe and it's not the same sound
  4. D

    F303 to much for this combo?

    ots cams that i would use is the trick flow stage 1. this would be a better overall cam for your setup. my second choice would be the crower #511 with 1.7 rockers. hope this help
  5. D

    for you mustang Gods...

    this is a prime example of the number game :bang: . if you decide to go with a thumper/tmoss combo(i think you should) and match it with a decent cam(tf stage 1)you will be very happy with the setup. don't get caught up in the number game. make sure you tune it. its all about a good combo/tune
  6. D

    ported AFR205 393 NEED CAM this week

    maybe trickflow stage III(236/248-.574"/.595"-110 lsa)rpm range for a 302 would be 3200-6800.i personally don't know if the extra cubic inches will effect in anyway order from summit(159.95) have it by this weekend. just my .02
  7. D

    EFI intake manifolds

    if you upgrade t-body with the cobra you don't need to buy a egr spacer as it has one built into it(saved $50). unknown about the same torque you would have to ask somebody(tmoss?) that would have the info on paper.personally think the cobra would be your best bet. it worked on the 93-95...
  8. D

    Design Concepts

    my hood was 319. with shipping and handling included.my hood also has a finished underlined.
  9. D

    EFI intake manifolds

    the cobra/gt-40 style of intakes would work best with your combo.keeps great low end and good torque through out the entire rpm range.my second choice would be the performer intake.just cause the quality is great with e-brock products.
  10. D

    Hedman exhaust..

    i have had the headers and h-pipe in the past they both fit great.the only complant was that the headers were painted not ceramic coated.the long tubes you have too search for a three bolt flanged h-pipe.they don't make one for the L/T's.
  11. D

    Design Concepts

    they are a good company to deal with.i bought a cobra R hood and bumper cover,they both went on without any problems. i will do business again with design concept.
  12. D

    Roller Rockers?........Steel or Aluminum, 1.6 or 1.7 or 1.72?

    comp cams pro mag. rockers are one of the best on the markert,if not the best.they are lightened at the valve and made stronger in high stress areas.only thing better would be a shaft rocker setup
  13. D

    Poll....best Bolt-on For Under $500

    asp race pullies=100 gears=150 bump timing=free mac O/R x-pipe=170 subframe=80 then save for tires,shifter(upr),intake,and t-body