Search results

For a few months now, my '05 GT has had this weird ticking or clicking noise coming from the engine. Seems to be coming from the back end of the engine. At first, it was only when I first started it up in the mornings. Then, little by little, is has gone longer and longer. It now continues...

I'm sick of my holley 600 cfm carb...seriously considering an Edelbrock Thunder Series AVS 500 cfm carb. My 289 has some head work and a mild cam, this seems to be a good fit. Has anybody tried this carb? like it? hate it?

Went to take the stang out yesterday and it was hard to start (backfired) and won't idle unless i held it to at least 1200 rpm. Also, when I took it out, its running rough, rpms surging up and down while cruising. The car was running fine last week. I've checked the powervalve and looked...

My '05 GT is pulling slightly to the left, and pulling much harder when I brake. This problem has been going on for a while now...I recently got new tires, I also replaced the brakes (rotors and pads) last weekend. The problem is still there. What do you think is causing the car/brakes to...

What would you guess I'm making for horsepower at the crank? Factory "C-code" 1967 289 block, rebuilt to stock specifications except for the following: Holley 600cfm vacuum secondary carb Edelbrock Performer intake w/1" open spacer Crane XR-i Ignition MSD 8.5mm wires Comp XE256H Cam...

My front rotors are warped, they've already been turned once (just a few months ago :nonono:), so its time for new rotors and pads. After a little research, I think I'm gonna get Brembo Blanks and Hawk HPS pads. I'm having trouble finding Brembo blanks for an '05 Mustang GT. I found two sites...

How do I remove the center dash panel in an '05 mustang? Its the panel with the two air vents on it, above the radio. I'm wanting to mount my gps to the panel, but can't find an obvious way to remove it.

I've had this car finished for several years, and I've put up with the gas smell every time I drive it, but its just getting old. The exhaust is terrible, it smells like a leaf blower; and I smell like gas after I drive it. I'm guessing maybe it's running too rich, maybe the timing is off...

Has anyone out there tried to build a supercharger kit for an 05-09 GT part by part? Or maybe started with a 4.6 2V or 5.0 charger kit and modified it to work on an 05-09? Is there any reason why an '03 cobra supercharger kit couldn't work on an 05 GT?

My '67 (289) has a stock replacement alternator and voltage regulator. When I'm idling with the lights on, you can see the lights flicker with the rpm. I didn't used to notice it (years ago) but it has gotten pretty bad over the last couple years, maybe since I added the A/C, but I'm really...

After driving my car for any length of time, I smell like the exhaust of a two stroke engine...I smell like "burnt" gas. What can I adjust to make this go away. Its a '67 mustang with a 289 and holley 600 cfm vacuum secondary carb. How can I fix it? Thanks ------------------------...

I'm thinking about selling my car within the next year, I have an idea of how much I think its worth, but I think the best people to ask are yal. I checked ebaymotors and autotrader, but couldn't really get any help from cars that had already been sold. Every restored car is different, so its...

I have a buddy with a '91 camaro, he sent me a link to this video. I try to check out all the muscle car videos I can find, and there is no classic mustang video as good as that one. Are we gonna let those chebbys and crap out do us with their show off videos? I challenge somebody, whoever...

I had my manual steering box rebuilt, which required me to pull the whole damn thing out, no rag joint:fuss:. Anyway, after re-installing it, everything was fine, but after a while, the bearing or sleeve or whatever must have slipped down too far or something, because now the steering wheel...

What size tire will fit in the rear for a '67 coupe?

This summer I'll be finishing the frame and suspension to my car. So far I've relocated the upper a-arms an inch down, added front disc brakes, subframe connectors, and a front 1" sway bar. Now I need to tackle the springs. I was considering an AIR Ride or similar suspension because it looks...

This summer I'll be finishing the frame and suspension to my car. So far I've relocated the upper a-arms an inch down, added front disc brakes, subframe connectors, and a front 1" sway bar. Now I need to tackle the springs. I was considering an AIR Ride or similar suspension because it looks...

The exhaust of my car stinks, bad. It kinda smells like gas...the best description of the smell is that the car exhuast smells just like the exhaust of my leaf blower. As far as I know, everything is in ship shape, but could there be a spark problem? mabye carb? Not too long ago I had it...

After installing a shift kit in my c-4 transmission, the kickdown on the tranny is holding me back from reaching full throttle. I un-hooked it and let the cable dangle, and it seemed to drive okay...can I leave it like this just for a couple days? and what is wrong that won't let the kickdown...

Something has been wrong with the horn wiring on my car since I got it. I ended up just unpluging both horns and taking them out, rendering the horn button useless. Well I was driving the other day and noticed that when I turned the steering wheel to a certain spot, the steering wheel backing...