Search results

  1. StreetDreamsGT

    Does rick anderson use ford mostorsports cores for his cams?

    I have a cam I bought a little while back from some guy, he said it was an anderson N41 cam and it has N41 stamped on it. However, it also has "M6250 E303" stamped above that, please tell me I didn't get screwed over :(.
  2. StreetDreamsGT

    How can I test to see if my radiator is clogged?

    The heat in the car blows nice and hot. I find when I drive the car if I don't have my efan on and the heater blowing it gets too hot. I figured that would point to it being the radiator. Also, I've flushed the radiator a few times using the drain plug and when I flushed it with water it poured...
  3. StreetDreamsGT

    How can I test to see if my radiator is clogged?

    I'm still trying to diagnose my cooling problems and I wanted to start with the radiator because it seems most likely the culprit. If the top hose is hot, but the bottom radiator hose is cool that should mean the radiator is doing its' job right?
  4. StreetDreamsGT

    need help with idler pully locations

    You're still using the stock alt/psteering bracket right? the belt tensioner would mount right onto that, there's no way to get it wrong since the tensioner has a stud on it and there's a hole for the stud in the bracket. The AC mounts above the powersteering, is it still all on the bracket?
  5. StreetDreamsGT

    Curious overheating issue... possibly an electric problem?

    Oh and one more thing, I didn't have a thermostat in it before and the car would behave like I said.. staying nice and cool. Now that I have the thermostat in it stays around the "O"-"R" range.
  6. StreetDreamsGT

    Curious overheating issue... possibly an electric problem?

    I just recently cleaned up the radiator, about two weeks ago... I know I need to get the coolant system flushed out. I just found out it isn't the gauges, I went to put in a new thermostat today and it looked like the radiator was bone dry, wtf? It took a little over 3 gallons to fill it back...
  7. StreetDreamsGT

    Curious overheating issue... possibly an electric problem?

    I installed an electric fan a couple weeks back and any time at all I could turn the fan on and cool everything enough that the coolant gauge would drop to the "A" in normal (yes I plan on getting a new gauge ASAP). Even when driving on the pkwy as long as I have my fan on the temp gauge stays...
  8. StreetDreamsGT

    1990 lx 5.0 falling on its face

    Like Ratz said the best place to start would be to pull the codes, as long as you pass you can cross out the sensors and start looking for a mechanical problem.
  9. StreetDreamsGT

    Want to hit 12s in a relatively stock stang

    Do you have an idea of what your weight was? Just dropped off some stuff at the junkyard and it looks like my car weighs 3220 with me in it... that's with the smog pump, stock rims, and I haven't gone with tubular anything yet. I should drop some weight once I swap to a T5 especially since I've...
  10. StreetDreamsGT

    Want to hit 12s in a relatively stock stang

    Notchback was that with ac, powersteering, and the smog pump? Anyone have any feedback on the afpr?
  11. StreetDreamsGT

    Pics of GTs with bumper cut for tailpipes

    Well I guess I'm going to go back to dumps after inspection, I really didn't want to do it I was just considering it. Thanks guys... by the way, the Hello Kitty muffler tip is from my sister's car
  12. StreetDreamsGT

    Pics of GTs with bumper cut for tailpipes

    Nope no mullet here, I still wanted to see what it looks like though... no one has pics?
  13. StreetDreamsGT

    Want to hit 12s in a relatively stock stang

    Figured I'd bring everyone up to date on my project... I blew a head gasket a week or two back so I had some work to do... while I was doing that though I couldn't help the fact that my edelbrock intake was glaring at me so I caved in and put that on along with gt40ps... here's how the car...
  14. StreetDreamsGT

    Pics of GTs with bumper cut for tailpipes

    Hey guys I have a set of tailpipes brand new chrome for an lx but I have a GT (friend gave em to me). I want to see if it looks any good with the bumper cut for each of the tailpipes to come through, otherwise after inspection I'll just pull em and go back to dumps lol.
  15. StreetDreamsGT

    Good low budget entry level supercharger?

    I already have mass air, check my sig, got a C&L mass air meter
  16. StreetDreamsGT

    Good low budget entry level supercharger?

    Do any of these kits seem good? I mean isn't this pretty cheap for a turbo setup? Seems like most companies turbo kits are expensive...
  17. StreetDreamsGT

    Good low budget entry level supercharger?

    I have a 255 lph pump in the tank, an adjustable fuel pressure regulator which has yet to be installed and 24 lb injectors at the moment ( I have a C&L mass air meter so upgrading injectors is easy for me). I guess then I should take it and have it tuned?
  18. StreetDreamsGT

    Good low budget entry level supercharger?

    Thanks blu
  19. StreetDreamsGT

    Good low budget entry level supercharger?

    Some of these kits on ebay aren't complete... so I was curious, if I picked up an FMU that was used with a powerdyne, or a vortech would it be compatible with a paxton? And what about the brackets? Are they pretty much interchangeable too? Because I've seen a couple people just selling the head...
  20. StreetDreamsGT

    Good low budget entry level supercharger?

    Does anyone have a pic of an engine equipped with a SC without the AC? I want to see what the belt routing looks like. It seems like the belt routing would be an issue because the alt gets relocated below the smog pump.
Top Bottom
Back
Forums
Menu